Food Additives

YTW-01 Treatment Agent?for WastewaterⅠ. Product name：[Chinese name]：Wastewater treatment agent, also known as：flocculant, coagulant aid, coagulant.[technical standard]：product quality accords with national standard GB15892-2003.Ⅱ. Characteristics：Wastewater treatment compared with other coagulant, has the following advantages：wide scope of application, to adapt to the water-based widely. Easy to rapid formation of alum flowers, precipitation performance is good. Suitable for wastewater pH range is wide (5~9), and the pH of the water after treatment and small drop in alkalinity. Water temperature low, still can keep the stable effect of flocculation precipitation. Alkalization degree is higher than other aluminum salt and iron, the erosion of equipment is smaller.Ⅲ.?Mechanism：This product is a kind of inorganic polymer coagulant. Bridge has strong adsorption, in the process of hydrolysis with electrochemical action, mainly through compressed double electric layer, electric neutralization and adsorption bridging, sediment trap and other physical and chemical mechanism of the tiny suspended particles in water and colloid material stability, aggregation, adsorption, flocculation, swept volume, coagulation, precipitation, etc., to achieve the effect of water quality purification treatment.Ⅳ. Usage：1. When using solid products, first adding water to dissolve with 10～15% of the solution, and then adding water diluted to the required concentration, when dissolved in water first slowly feeding, and stir constantly.2. When using liquid products, adding water to the required concentration.3. The dosage according to the different of raw water turbidity and season, determination of optimum dosage, raw water turbidity in commonly 100~500 mg/L, each one thousand square dosing quantity is 5~8 kg.Drug usage reference table：Raw water turbidity100～250400～5001000～50007500Adding quantity (kg/kt)481520water turbidity35684. Suggestions according to the different water quality, through the