Non-metallic Mineral Products

YH-938B is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.1.Advantages:☆ High gelling efficiency over low to medium polarity organic liquids.?☆ Ideal thixotropy ,Website:http://www.organophilic-clay.com,anti-sagging,anti-sediment property.☆ Imparts particle suspension, preventing hard settling of pigment and fillers.☆ Exerts strong film reinforce action in organic binder systems.☆ Good dispersion performance.☆ Upgrade version of BP-186.2.Typical Properties:ColorAppearanceDensityMoisture(@105℃,2hrs)Fineness through 200 meshLoss on Ignition( @1000℃ )WhiteFree Flowing Powder1.65g/cm3≤3.5%≥98%≤38%3.Typical Applications:●Alkyd paint●Inks●Acrylic paint●Lubricating grease●Wooden paint●Cosmetics●Varnish●Polyester paint●Road paint●Silica paint4.Incorportions:YH-938B belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of?the organoclay platelet stacks.Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate) is 30%-50% by weight of YH-938B.It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result?in poorer viscosity development.5.Recommended Levels:The amount of YH-938B rheological additive required depends upon the type?of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total?formulation weight.6.International Countertypes:?Bentone?38, Claytone?40, Tixogel?VP-A,Perchem?44,Bengel?43 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? NOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on statements herein when purchasing any products. Purchasers should make their own investigations to