Non-metallic Mineral Products

YH-938A is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,Website:http://www.organophilic-clay.com, medium and high polarity.1.Advantages:☆ High gelling efficiency over low,medium and high polarity organic liquids.☆ Easy of incorporation. No need for polar activator or making pregel.☆ Consistent in rheology and thixotropy development.☆ Easy of dispersion with excellent fineness.In suitable systems, it can reach 5μ ?or even less.☆ Good anti-sagging property and anti-sediment property.☆ Can be added at any step,even can be used in post-addition to correct the final viscosity of a certain batch.2.Typical Properties:ColorAppearanceDensityMoisture(@105℃,2hrs)Fineness through 200 meshLoss on Ignition( @1000℃ )Light YellowFree Flowing Powder1.7g/cm3≤3.5%≥99%≤38%3.Typical Applications:●Acrylic paint●Solvent epoxy paint●Alkyd paint●Inks(mineral oil)●Anti-corrosion paint●Inks(Nitro)●Bituminous paint●Adhesive●Baking paint●Putties and sealant●Chlorinated rubber paint●Varnish●None solvent epoxy paint●Nitro lacquer●Marine paint●Lubricating grease●Silica paint4.Incorporations:YH-938A belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, YH-938A does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.?YH-938A can be added at any point in the manufacturing process. If addition is made with polar activator or after grinding,better performance can be expected.5.Recommended Levels:The amount of YH-938A rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-1.5% based on the total formulation weight.6.International Countertypes: Bentone?SD-2, Claytone?HY,Claytone?APA ? ? ? ? ? ? ? ? ? ? ? ?NOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on st