Non-metallic Mineral Products

YH-180 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,Website:http://www.organophilic-clay.com,medium and high polarity.1. Advantages:☆ High gelling efficiency over low, medium and high polarity organic liquids.☆ Produce reproducible thixotropic consistency over a wide temperature range.☆ High viscosity and excellent thickening property over a wide temperature range.☆ Imparts particle suspension, preventing hard settling of pigment and fillers.☆ Exerts strong film reinforce action in organic binder systems.☆ High purity:high percentage of montmorillonite,free cristobalite <1%.☆ High efficiency:save 30%dosage compared with ordinary grades.☆ Good dispersion:self-activated in medium/high polar system.Its fineness can reach 10μ or even less.?2. Typical Properties:ColorAppearanceDensityMoisture(@105℃,2hrs)Fineness through 200 meshLoss on Ignition( @1000℃ )Light WhiteFree Flowing Powder1.85g/cm3≤3.5%≥99%≤45%3. Typical Applications:●Acrylic paint●Solvent epoxy paint●Alkyd paint●Wooden paint●Baking paint●Zinc-rich paint●Decorative paint●Inks(mineral oil,vegetable oil)●Industrial paint●Varnish●Marine paint●Lubricating grease●Non-solvent epoxy paint●Cosmetics●Polyester paint4. Incorporations:YH-180 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, YH-180 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.?YH-180can be added at any point in the manufacturing process. If addition is made with polar activator or after grinding,better performance can be expected.Polar Activator: Dosage of polar activator( such as propylene carbonate, 95%ethanol , acetone or 95% methanol) is 20%-30% by weight of YH-180.It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.5. Recommended Levels:The amount of YH-180 r