Instruments & Meters

WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics Test (AC&DC), Input Start Characteristics Test (DC)

Specification:
1. Input Characteristics Test (AC)
?To measure the input voltage, current, power, power factor, power grid frequency, total harmonic and the harmonic component of 0 ~ 50 times, wave ratio, initial phase angle, peak phase angle, the phase Angle.
? The fundamental frequency scope of the current and voltage : 45Hz～65Hz; Narrowband range: 45 Hz ~ 5 kHz; Broadband range: 45 Hz ~ 1 MHz.
? Voltage range: 3 ~ 300 V (CF = 1.67); Current range: 5mA ~ 2.7A (CF = 3); Power range: 0.015 ~ 800 W; Power factor range: 0.000 ~ + 1.000.
2. Input Characteristics Test (DC)
? Measuring voltage, current, power.
? Voltage range: 3～500V; Current range: 5mA～8A; Power range: 0.015～4000W
3. Output Characteristics Test (AC)
? Measuring lamp voltage, lamp current, and lamp power.
? Lamp voltage range: 3～300V(CF=3); Lamp current range: 5mA～2.7A(CF=3); Lamp power range: 0.015～800W
4. Output Characteristics Test (DC)
? Measuring output lamp voltage, lamp current, lamp power, ripple wave current.
? Voltage range: 3～500V; Current range: 5mA～8A; Power range: 0.015～4KW; Ripple wave current range: 5mA～2.5A.
5. Output Start Characteristics Test (DC)
? Change curve and data of the measuring lamp voltage and lamp current within 0～2 seconds.
? Lamp voltage range: 3～500V;
? Lamp current range: 5mA～8A