Paper Machinery

Wood debarker (wood peeling machine) is used for peeling bark of logs,Website:http://www.fdsp-cn.com, mainly used in wood pulp and paper mills and wood-based panel plant which will use the wood log as raw material. With small investment, low energy consumption, less space occupied, low construction costs, High capacity and other characteristics. Suitable for connecting medium and large sized wood chipper, as well as dosing effect.

Structure Principle：
Logs from the upper side near the drive go into wood debarker machine, With the drive motor and drive components, the peeling machine with teeth will rotate by a certain direction, will direct peel the bark off, while rotating peeling roller will bring the wood logs move together, so that the stack of logs rolling up and down, touching, hitting, rubbing each other between the logs. The barks will be peeled down and through the roller and the plate tooth falls out on the conveyor belt .

Features of wood debarker:
1. Cleanly debarked logs with minimal fibre loss
2. Debarking knives are arranged in screw type, with high debarking efficiency.
3. Equipped with belt conveyor at the bottom of wood debarker, which is set to collect and convey barks.
4. Separated type side board, which makes maintenance more convenience.
5. Can be customized according to raw material diameter and length.
6. Continuous operation allowed.
7. Hydraulic opening gates are available according to technological process.
8. CE certificated


FDSP can not only produce professional individual biomass equipment such as wood pellet mill, sawdust pellet machine, straw pellet mill, grass pellet mill, alfalfa pellet mill etc, but provide biomass processing line including chipper, hammer mill, dryer, pellet mill, cooler, screener, conveyor, bagging scale and other related ancillary equipment.