Machinery & Equipment

Windows Door Frame Roll Forming Machine

Our safety windows door frame roll forming machine is available to produce the steel windows door frame both single side and double sides. Except the windows door frame roll forming machine, to produce the whole sets of steel door frames,we need also the additional punching tools to produce the notching part on the steel frames. The most important technique is the punching tools on the windows door frame roll forming machine because the door frames have to be ensured not break after punching. This whole windows door frame roll forming machine,controlled by PLC computer system with encoder and frequency converter,will be running fully automatically including hydraulic punching and hydraulic cutting.

Flowchart of the Windows Door Frame Roll Forming Machine,Safety Door Frame Roll Forming Machine :
Manual Decoiler/Uncoiler-->Feeding Guide--> Hydraulic Punching-->Roll Forming Machine-->Hydraulic Cutting-->Runnout Tables


Detailed Specifications of The Windows Door Frame Roll Forming Machine :

General Introduction aobut Windows Door Frame Roll Forming Machine:
Materials:Q195, HCR Steel Coil
Material Thickness:1.2mm—1.5mm
Profiles Width:200mm—230mm.
Profiles Height:50mm
Profiles Specification:As per attched drawing.
Technical Specifications:
DECOILER or Windows Door Frame Roll Forming Machine:
Operational Type:Manual Expansion
Max. Width:400 mm
Inner Diameter:Φ400 – Φ450 mm
Out Diameter:1500mm
Max. Loading Capacity:3 Tons
ROLL FORMING MACHINE:
Rollers Stations:22 stations
Material of Roller:45# steel coated with hard chorme 0.5mm.
Rollers& acute; Hardness after Heat Treatment:HRC55 – 57
Main Shaft Diameter:70 mm
Main Shaft Material:45# Steel
Machine Frame Steel Thickness:20 mm
Transmitted: by 1.2” chain.
Gears& acute;Thickness:45 mm
Main Bearing:60308
Motor Power:15 kw
Speed Reducer Model:QZ 400
Rolling Speed:6– 10 m/min;
Dimmensions of the windows door frame roll forming machine:10800mmx900mmx1300mm.