Generators

Introduction of Tubular turbine

The Tubular type turbines are usually the best choices for exploitation of tidal power and hydraulic power with extremely low heads and extremely large flow rates. They have the advantages such as large discharge, high flow speed, high efficiency and less excavation, etc. Their variations have Bulb, Pit, Siphon and S types according to their structural types.

The water diversion parts, runner and water drainage parts of Tubular turbine are on one axial line. The water flow directly and straightly through the runner without spiral casing. The water flow is axial from the pipe inlet to the draft tube outlet.
Tubular turbine generally has two categories: fully tubular and half tubular. The half Tubular turbine is divided into bulb, pit and shaft extension types, etc.

Application scope
Application scope of heads: 2m~25m
Runner diameters: 1.0m ~ 7.2m
Installable capacity: 200KW ~ 200000KW



We also providing different kinds of water turbine generator:

1.Francis Turbine
2.Pelton Turbine
3.Inclined-jet water turbine
4.Cross flow water turbine
5.Tubular water turbine

Company Introduction
Found in 1958, our factory in hydropower products has continuously been one of the national strategic turbine manufacturers in China since year 1995. It has now 246,000 square meters ground area and 68,000 square meters office building area. With over 500 workers and over 200 technicians and engineers, ADDNEW& acute;s invested factory is certificated by ISO9000-2000 and CE.