Vertical OTR Tire Shredder Machine Cast Steel Big Size 16PCS Block - ZY-1200
Vertical OTR Tire Shredder Machine Cast Steel Big Size 16PCS Block For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Vertical OTR Tire Shredder Machine Cast Steel Big Size 16PCS Block, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
Vertical OTR Tire Shredder Machine Cast Steel Big Size 16PCS Block
?
?
Specifications
?
Recycled Vehicle Tire Wire Extractor and Cutter?
Tire outer diameter Less than 1200mm?
Working under normal temperature
?
- - - -
Type | ZY1250 |
Working voltage | Three phase 380V/50Hz? |
Motor power | 15KW |
Applied Tire Outer Diameter | ≤ 1200mm |
Cooling method | Circulating water cooling? |
Anti-wear hydraulic oil | 40# |
Oil Volume | 400L |
Extracting Cylinder working stroke | 1250mm |
Cutting cylinder working stroke | 350mm |
Extracting Cylinder working pressure | ≤20 MPa |
Pressing cylinder pressure | ≤10 MPa |
Handling Capacity | 28-38 pcs/hour |
Dimension | 4100X870X1550mm ? |
Machine Weight | 2200kg |
- - - -
?
?
Advantages:
?
1.?This machine integrate the waste tire wire cutting and extracting machine, which
reduces the cot and enhances the efficiency greatly!
?
2.?dopts hydraulic reciprocating extracting method, full circle or half circle of
bead wire can be easily extracted.
?
3.?Feedig oil by Duplex Impeller Pump?with low operating noise, the two?pumps will
supply oil at the same time when the Extracting Cylinder reach out, and only one
pump supplies oil when?hauling back?the bead wire, so as to?reduce the dynamo& acute;s
loading current and save energy.
?
4.?The speed and pressure of the Extracting Cylinder will not change when the
Pressing Cylinder is working, so as to enhance the machine& acute;s efficiency and extend
the Control Valve& acute;s lifetime greatly!
?
5.?Operations are interchangeable between manual and automatic.
?
?
Our?Waste Tire Recyling Plant can?make rubber powder?of 30-80 mesh from waste tire,
also, we can collect the scrap wire?efficiently, also we have devices to collect and filter
the scrap and waste gas so that we can process the waste tire environmentally.
?
And we can customize this plant according to customer& acute;s requirements, such as
the capacity, the size of rubber powder or rubber particle.
?
?
FAQ
?
?
The brief description of tire processing:
?
1. First, we need to cut and draw out the bead wire of the tire by the Compound Tire Cutter
and Extractor,
?
2. Then we can put the tire into the Tire Crusher by the conveyor, the tire will be crushed
into small pieces with the size of 50x50mm.
?
3. And those small pieces will be conveyed to the Secondary Crusher to be crushed into
small particles of 6-12mm.
?
4. Now we need a Magnetic Separator to separate the steel fiber from the rubber particles,
and a Square Magnetic Vibrator to separate the coarse fiber from the rubber particles by
vibrating.
?
5. The coarse fiber will be collected in a box and the rubber particles will be delivered to a
third Rubber Shredder to be shredded smaller of 1-4mm.
?
6. And then we need a Static Vibrator to gather the small fiber into clumps by static force,
and to filter the rubber particles by screen.
?
7. The fiber clumps will be stored in the Fiber Collecting Machine by conveyor, while the
rubber particles will be sent to the Airflow Classifier,
?
8. The residual fiber will be blowed?to the Fiber Collecting Machine by the Airflow Classifier,
and the purified rubber particles will be collected by the Storage Bin,
?
9. And then be delivered to the Rubber Grinder, so the rubber particles will be grinded
into rubber powder.
?
10. Then the rubber powder will be separated by the Three-layer Vibrator according to its
size, and be packed automatically by the Packing Machine.
?
11. The exhaust gas and dust will be collected by the Cyclone Collector, then the dust will
be absorbed by the Dust Separation Machine,
?
12. While the gas will be filtered by Activated Carbon in the Air Purifier and be emitted to Air.
?
?
Jiangyin Zhenya Machinery Co., Ltd
Address: No . 20 Jinmao Road , Zhutang Town , Jiangyin City , Jiangsu Province , China., Wuxi, Jiangsu, China, 214000
Tel: 86-510-86386879
Jiangyin Jiangyin Zhenya Machinery Co., Ltd is located in Zhutang Town, Jiangyin City.
Our company is a famous high-tech company in the country. It mainly specialises in research, development and production of production line which pulverizes worn-out types to fine rubber powder under normal atmosphere temperature. It work to control black pollution and develop rubber powder industry as its own task, devote itself to the environmental protection industry on the recovery and recycle utilization of worn-out tyres.
The production line are well sold all over the country and exported to more than 20 countries and regions. The success in production of many rubber powder enterprises both at home and abroad indicates that our equipments have stable and reliable performance, various technology indexes all conform to the standard, no pollution produces during production,they have high utilization ratio of worn-out tyres.The fine rubber powder produced has high technological content and conforms to the high quality product standard.
The method of recycling waste tire is that separates the inner steel wire and fiber from waste tire through many kinds of technology and grinds the rubber granules into powder. Waste tire treatment equipment is suitable for international development and management style. It's merits on that can recovery the waste tire to into rubber granule/powder reaching to the availability 100%. Owing to no second pollution in production process, reusing waste tire is really recycling way called long duration development.
The rubber powders are widely used and hardly cover all industrial lines. It can replace the material such as plastic and PCV, instead of nature rubber, can be rebirth tires .It is used in sport runway and shoe sole, it also can be used in highway, air trip as well as third generation railway sleeper as modification asphalt.
