Computers & Consumer Electronics

1. Genearl decription 1.1 Scope of application This specification is intended to stipulate VIP-C026?battery charger’s?electrical and mechanical characteristics,Website:http://www.charger-viwipow.com,?appearance,?external environmental requirements,?etc.2. Features of the product?This charger is intelligent and it has the following features: 1、automatically identify batteries’ polarity. 2、automatically identify single or double lithium battery. 3、activate batteries with zero voltage or batteries having been protected. 4、distinguish rechargeable AA/AAA batteries from non-rechargeable?ones. 5、USB output, USB is internally equipped with D+、D-?terminals. The charger can charge devices that are able to identify D+、D-?terminals. 6、Lithium batteries adopt precharging,?constant-current charging and constant-voltage charging,?thus shall not be undercharged or overcharged. 7、AA/AAA batteries adopt pulse current charging and are controlled by -△V and time, thus shall not be undercharged or overcharged.3. Environmental conditions This charger is for the purpose of indoor chargingOperating temperature0℃—40℃Storage temperature-10℃～50℃Operating humidity35%—95%Storage45%—85%Testing temperature25℃±10℃Barometric pressure70—106Mpa4.?Electrical characteristics 4.1 input characteristics 4.1.1 input voltage DC10V-15V ?????4.1.2?input current 600mA （MAX）4.2 output characteristics 4.2.1?output voltage：DC 1.4V,DC 1.4V×2,DC4.2V,DC8.4V,USB5V 4.2.2?output current：600mA（MAX） 4.2.3?charging current：AAA*1：500mA ?　AAA*2：500mA AA*1：?500mA ???AA*2：500 mA USB：?500mA ?? DC4.2V：500mA DC8.4V：500mA 4.2.4?indicating function：When the charger is connected to power, its LED light turns green and light for 5 seconds before going out.?If batteries are installed and normal charging occurs,?the LED light would turn red. Otherwise, it will remain off.?Once charging is completed, trickle charging occurs and the LED light turns green.?When non-rechargeable or bad batteries are installed to the charger, the LED ligh