Electronics Projects

Triplex Window Fiber Optic Coupler Splitter Single Mode Fused Biconical Tape

?

?

Coupling ratio (%): 1-50
Directivity (dB): >55dB
Operating temperature: -20°C - 85°C
Storage temperature: -40°C - 85°C
Fiber type corning singlemode: SMF-28 , DS Fiber, or flexcore
Fiber pigtail length (m): 1 meter
Port configuration: 1x2 or 2x2
Package dimension package: A, B, C

Single mode triplex window wideband couplers


Grade: PA
Excess loss (typical )(dB): 0.100.15
Maximum insertion loss (dB): 3.63.8
Uniformity (Max.) (dB): >0.71.0
Polarization sensitivity (dB): 0.100.15
Operating wavelength (nm) 1310 /1550 + 40, and 1490+ 10nm

?

?

?

Overview

?

Planar Lightwave Circuit Splitter (PLC Splitters) is a technology based on planar waveguide optical power distribution products, with low insertion loss and polarization dependent loss, small size, wide operating wavelength range, high channel uniformity and good characteristics. Especially for passive optical network

(EPON, BPON, GPON, etc.) to connect the central office and terminal equipment and optical signal splitter to achieve. All products comply with Telcordia GR-1209-CORE, Telcordia GR-1221-CORE, YD / T 1117-2001 and RoHS standards. Optic King 1xN technology can provide a full range of 2xN products, and customized for all occasions in the optical splitter.

?

Features

?

● Ultra-end insertion loss and associated loss of polarization

● good spectral uniformity

● wide wavelength bandwidth,

● a wide range of working environment

● High reliability

● Small Size

?

?

?

Applications

?

● can be widely used for FTTx

● Passive Optical Network (OPN)

● Cable TV Network (CATV)
#
- - - -
1 x N |
? Parameter | ? Unit | Specification |
1x2 | 1x4 | 1x8 | 1x16 | 1x32 | 1x64 |
Operating Wavelength | nm | 1260-1650 |
? ? Insertion Loss | standar | ? ? dB | 3.6 | 7.0 | 10.2 | 13.3 | 16.5 | 20.0 |
MAX (P/S) | ? 3.8/4.0 | ? 7.2/7.4 | 10.5/ 10.7 | ? 13.5/13.9 | ? 16.5/17.2 | ? 20.0/21.5 |
PDL | dB | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.3 |
Loss Uniformaity | dB | ≤0.6 | ≤0.8 | ≤1.0 | ≤1.4 | ≤1.6 | ≤1.9 |
Return Loss @1550nm | dB | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 |
Wavelength Dependent Loss | dB | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
Fiber Length | m | 1.2(±0.1)or customer specified |
Fiber Type | ? | Corning SMF-28e or customer specified |
Temperature Stability(-40 to +85℃) | dB | ? ≤0.5 |
Operation Temperature | ℃ | -40 to +85 |
Max Optical input power | mW | 300 |
- - - -

?

#
- - - -
? | 1×N PLC Splitter Specifications (Measured at room temperature and excludes connector | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | loss) | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Port Configuration | ? | 1x2 | 1x4 | 1x8 | ? | 1x16 | 1x32 | 1x64 | ? | ? |
? | Fiber Type | ? | ? | SMF-28e or customer specified | ? | ? | ? | ? |
? | Operating | ? | ? | ? | 1260～1650 | ? | ? | ? | ? |
? | Wavelength (nm) | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Insertion Loss (dB) | ? | 3.9 | 7.4 | 10.5 | ? | 13.5 | 16.9 | 21.0 | ? | ? |
? | Loss Uniformity | Max | 0.5 | 0.7 | 1.0 | ? | 1.4 | 1.8 | 2.0 | ? | ? |
? | (dB) | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Return Loss (dB) | Min | 55 | 55 | 55 | ? | 55 | 55 | 55 | ? | ? |
? | Polarization | Max | 0.2 | 0.2 | 0.3 | ? | 0.3 | 0.3 | 0.4 | ? | ? |
? | Dependent | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Directivity (dB) | Min | 55 | 55 | 55 | ? | 55 | 55 | 55 | ? | ? |
? | Wavelength | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Dependent | Max | 0.3 | 0.3 | 0.3 | ? | 0.8 | 0.5 | 0.8 | ? | ? |
? | Loss(dB) | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Temperature | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Dependent Loss (- | Max | 0.5 | 0.5 | 0.5 | ? | 0.8 | 0.8 | 1 | ? | ? |
? | 40～85 ℃) (dB) | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Operating | ? | ? | ? | -40～+85 | ? | ? | ? | ? | ? |
? | Temperature (℃) | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Storage | ? | ? | ? | -40～+85 | ? | ? | ? | ? | ? |
? | Temperature (℃) | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | Packaging Size | Fan-Out | 60x7x4 | 60x7x4 | 60x7x4 | ? | 60x12x4 | 80x20x6 | 80x20x6 | ? | ? |
? | (mm) | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
- - - -


?
FAQ ?
1) How can I place order?

A: You can contact us by email about your order details, or place order on line.


2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.


3) What& acute;s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don& acute;t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.


4) How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.


5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.

becautiful custom-made box designs for you .

?

Q5. What about the after-sales sevice ?

A5 : Our cable will provide free change for new if there is any quality problem in your order .

?

Q6. Payment term ?

A6 : T/T 30% deposit ,70% against the copy of BL . For our familiar customer , we can support good credit payments date .

Pakcing Way : Normally , the packing is PE bag packing with sticker , and outer brown carton .

?

Company Introduce

?

Shenzhen Optostar Optoelectronics Co., Ltd. was founded in May 2006 and headquartered in Nanshan District, Shenzhen, China. As a leading manufacturer and supplier for fiber optical components and system products in China, we can provide our customers with active components such as GPON/EPON, all serial SFP transceivers, Media Converters, PDH multiplexers, EDFAs, Video Multiplexers which are used for telecommunication, network and security. We are also producing passive components such as Patch Cords, CWDM, DWDM, PLC splitters and so on.

Our company has a lot of advantages based on 10 years of experience in the optical telecommunication industry: Perfect techniques and producing plant, Abundant technology development capability with 10 persons R&D team, Rich OEM & ODM co-operation experience with famous overseas companies, Strong ability to provide whole network solutions. We owned 2 production plants which the total area is more than 6000sqm and more than 300 workers and 50 technicians and 1 headquarter office which has sales team of around 30 persons. After more than ten years of operation, Optostar has successfully developed the worldwide market. Our products are widely accepted by the customer from all of the world and win good reputations by themselves. We promise to provide our customers with high quality products and nice services. To achieve your 100% satisfaction is our persistent goal all along!