Tips for using and maintaining faucets

1 min read

1. Do not use too much force to turn on and off the faucet, just turn it gently. Even for traditional faucets, you don't need to use a lot of force to twist it. In particular, do not use the handle as a handrail for support or use.

2. The metal hose of the shower head of the faucet should be kept in a naturally stretched state, and do not coil it around the faucet when not in use. At the same time, when using or not in use, pay attention to the joint between the hose and the valve body so as not to form a dead angle to avoid breaking or damaging the hose.

3. When the water pressure is not less than 0.02mpa (i.e. 0.2kgf/cm2), after using it for a period of time, if the water output is found to be reduced or even the water heater is turned off, you can gently unscrew the screen cover at the water outlet of the faucet to remove impurities, and it can generally be restored to its original state.

4. Ask experienced and qualified professionals to carry out the construction and installation. During installation, the faucet should be avoided from hitting hard objects as much as possible, and cement, glue, etc. should not be left on the surface to avoid damaging the gloss of the surface coating. Be careful to remove the debris in the pipe before installing the faucet.