R/c Toys

Price: US $329
Website: www.zetdar.com
Accept paypal



Vehicle
Length: 23.4& quot; (595mm)
Wheelbase: 14.8-15.1& quot;(375-385mm) adjustable
Width: 16.4-16.5& quot; (416-420mm) optional hubs required
Dry Weight: 9.0lbs (4000g) may vary with equipment used
Diff Ratio: F/R 9/40t, center 44T
Battery Tray Dimensions: 1.9x5.8& quot; (50x148mm) 2x2s or 1x4s config.

Body
Length: 17.5& quot; (444mm)
Width: 4.8& quot; (123mm)
Height: 5& quot; (127mm)

Four wheel CV driveshafts with captured pins on all four wheels
Two-piece CNC machined motor mount with dual clamping gear mesh adjustment, lightweight direct-to-diff mount design, mount accommodates truggy or long can motors up to 78mm long, mount uses standard MOD 1 pinion, Tekno RC Traktion Drive or Elektri-Clutch
CNC machined anodized 7075 aluminum shock towers, front 0.24& quot; (6mm) thick, rear 0.20& quot; (5mm) thick
Clear truggy type body with high downforce wing, and adjustable wing mount
Full ball bearing equipped steering, lightened aluminum posts, adjustable bump steer and Ackerman
CNC machined hard anodized aluminum chassis, 0.16& quot; (4mm) thick, with an optimized narrow layout
Three fluid filled differentials, with straight cut CNC machined hardened steel ring and pinion gears
CNC machined hard anodized aluminum bodied shocks, 16mm bore, 4mm hardened steel polished shafts, 5.4& quot; (137mm) long rear shocks, 4.8& quot; (122mm) long front shocks, truggy specific springs, CNC machined 8x1.3mm tapered pistons
Fully adjustable long travel geometry suspension, truggy specific arms and sway bars, lightened aluminum pivot balls, adjustable anti-squat, rear arms, roll center, and bump steer
Adjustable caster/toe-in and front/rear camber