Chemicals

Product Description:Talc masterbatch is made of ultrafine talcum powder as the main raw material, mixed with polymer resin carrier and related modifier, and fully mixed by the high performance double screw machine to be extrusion and granulation. Good dispersibility, low affect to the resin transparency, uniform plasticizing, good processing performance. It is mainly used?in PE blow transparent film. It can significantly improve products surface gloss, weatherability, adhesion and reduce the production cost.Talc filler masterbatch contains talcum, carrier resin and some additives. It’s suitable for film blowing, extrusion molding, injection molding,?etc. This product has dispersion very fine, free of agglomeration and bring for the end product more improve printability, smoothness, hardness, stiffness, antiblock, etc.Product Data: NameTalc?filler masterbatch?for blowing filmFillerTalcumMesh1250~1500Filler content≤75%CarrierPP/PEMFI ( g/10min )2~6Density ( g/cm3)1.6~1.7Moisture≤0.01%Adding ration5~50%ApplicationBlow molding, film blowing,?etc.Payment termsTT , LC etc.Delivery timeLess than 7 days after receiving the advance paymentPacking25Kg compound woven bags, or customizedMOQ1 tonStorageKeep the products in a dry, ventilated place, Note to avoid moisture?and ?insolation, rain and breakage in transportation.Product Advantages: 1.The oil absorption of the powder is low, good fluidity and dispersion, good surface finishes of the products. 2.Light Specific gravity, high transparent and brightness, the refractive index close to the PP、PE 3.The high adding ratio is more than 50%. 4.Good dispersion, do not separate?out. 5.Good heat sealability, high tensile strength 6.Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property, improve the strength and toughness of the product. 7.Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding Application: