Air-compressing & Air-separation

?
?T5 LED Tube Pre Scored Board PCB Depaneling Machine 0.3mm - 3.5mm thickness

?

?

1200mm length LED Strip Pre-scored Board PCB Depaneling Machine?Parameters:

?

This type pcb depanelizer mainly design for led lighting factory,this is very popular in led lighting factory.

?

1. Circuit board cutting knife and the six , two of a group of vertical , constituting a cutting unit . Reduce time off mode: the entire cutting process is divided into three stages, due to the small amount of each cut , so the stress generated in the process of cutting more traditional ( take the knife scoreboard running board scoreboard pneumatic scoreboard as ) more than 80% , dividing good smooth edge of the board , the board is very flat, not twisted not Alice .

?

2. unique limit device , enabling employees to operate more convenient, faster and more efficient scoreboard speed , no training to operate.

?

3. blade fitted with transparent plexiglass pinch hand , saw blade running at the same time , they effectively eliminate the accident .

?

4. unique times cutting mode , making the cutting process is very smooth , greatly improving the positioning capability V groove, even cut very shallow V-groove boards , cases of bias will not appear , avoid scrap board.

?

5. ?As the scoreboard force on each blade is small, so that the lower blade wear , increase the life of the blade , reducing the cost.

?

6. The product is suitable for dividing LED aluminum plate (unlimited length ) as the market generally 400MM 600MM 800MM 1200MM 1500MM length , PCB board. Copper substrate strip wave MDF board FR-4 and so on .
?

?Aluminium pcb separator YES-6 Pre Scored PCB Depanelizer Apply to :


LED Panel,Fiber Board,Aluminium Plate,Aluminium Substrate,Copper Substrate FR4,Glass Fiber Board
?

?
Why Clients Buy Our PCB Separator Model YES-6
?

- - - -
1. Currently, it is the only machine that can guarantee the aluminum plate without deformation after cutting |
2. With unique cutting method, the circuit board is cut by six blades. It is a group composed of one upper and one lower blade, and is also a cutting unit.
There are A, B, C, three groups. The whole cutting process is divided into three stages from group A blade which cut 10% board then to the group B blade knife cut through groove cutting by group A to complete another 40% .the last 50% is cut by group C blade and finishing.
because each cutting volume is small, the stress produced during the cutting progress declined by more than 50% compared with the traditional cut off at a time.
Thus the edge of the board and its surface are very smooth without warping . |
3. Because of the multiple cutting, cutting process is very smooth and greatly improves the capability of position of V-CUT groove .Even if with shallow slot V-CUT groove the board won& acute;t jump out of blade, avoiding adverse. |
4. Because cutting force of the blade is small. The wheel disc with SKH high precision steel material which is imported from the Japan. durability of the blade greatly improved , and the lifetime can be one year or more when cutting the aluminum board. |
5. All the cutting blades are calibrated by Excitation double-frequency laser interference measurement instrument. Ensure that the latter knife can accurately continue to cut in the slots which already cut by the former knife. The jitter of knife point is less than 0.02mm. Ensure perfect cutting quality.
? |
6. Can be mounted stainless steel platform with laser calibration positioning function |
7. Can be adjusted the above and below round knife precisely,Circular knife can turn mill reoccupy many times, the shape of cutter can be customized. |
8. X, Y axis can free adjustment and make the cutting accuracy to the highest. |
- - - -


Customers FAQ About PCB Separator YES-6:
?
1. Q:Do you have any certification for this machine?
A:YES,We have CE ISO FCC ROHS etc.
?
2. Q:What is warranty of the machine?
A:1 year.
?
3. Q:How do you pack the machine?
A:We fix the machine on the plywood base with screws to ensure safe transportation.
?
4. Q:What is life time of machine blades?
A:About 6-12 months.
?
5. Q:What is material of blades?
A:Japan high speed steel SKH-9
?
6. Q:Can the blades be sharpened?
A:Yes, they could be re-sharpened for 2-3 times.
?
7. Q:How do you offer oversea service?
A:We could send engineer to do installation and training for client if needs.
?
8. Q:Can we see your machine in our country?
A:Yes, we would like to offer contact details of our clients who are using our machines.
?