Power Supplies

Standalone 10/100M fiber optic converter , Auto - Negotiationfibre media converter SNMP Manageme

Available 3C-MC-R16M remote side


?
?
10/100M Ethernet Media Converter is the network communication device that extending the Ethernet transmission distances up to 120Km over the fibre optic cable, it can convert 10Base-T, 100Base-T Ethernet electric signal to 100Base-FX optical signal. 10/100M Ethernet Media Converter completely conforms to 10Base-T, 100Base-TX, 100Base-FX and IEEE 802.3x standards, and compatible with Network Card, Repeater, HUB and SWITCH, provides low-cost, high-reliability solutions for broadband special network and fiber metropolitan area network.
?
?

Features

?

?
# Supports SNMP management (only for management device)
# Enable/Disable optical link-loss alarm function
# Four transmission modes are selectable
# Comply with IEEE 802.3μ 100BASE-FX/TX, IEEE802.3 10BASE-T standard
# Comply with IEEE 802.1Q VLAN protocol
# Support 10/100M, Full/Half duplex auto-negotiation
# Support MDI/MDIX autosense
# Support transmission distance of up to 120km (Dual-fiber)
# Support over-size packets of up to 1600 Byte
# Support hot-swappable
# The cards work as standalone and rack-based Media Converters
# Single-fiber and dual-fiber devices are available

?

?

Specifications

?

- Mechanical Parameters

?



?

-Optical Parameters

?

- - - -
Multimode | Fiber: 62.5/125, 50/125, 100/140μm |
MM2km orMM5km | Output power: >﹣18dBm |
Receiving sensitivity: <﹣31dBm |
Distance: 0～2km or 0～5km |
Connector: SC(standard)／FC(optional) /ST(optional) |
Type: dual-fiber |
Wavelength: 850nm/1300nm/1310nm |
Single-mode | Fiber:9/125, 8.3/125, 8.7/125 or 10/125μm |
25km | Distance: 0～25km |
Output power:-13～﹣8dBm |
Receiving sensitivity: <﹣34dBm |
Connector: SC(standard)／FC(optional) /ST(optional) |
Type: single-fiber / dual-fiber |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
40km | Distance: 0～40km |
Output power:﹣11～﹣6dBm |
Receiving sensitivity: < ﹣34dBm |
Connector: SC(standard)／FC(optional) /ST(optional) |
Type: single-fiber / dual-fiber |
Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
60km | Distance: 0～60km (when less than 15km, use attenuator) |
Output power:﹣5～0dBm |
Receiving sensitivity: < ﹣36dBm |
Connector: SC(standard)／FC(optional) /ST(optional) |
Type: single-fiber / dual-fiber |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) |
80km | Distance: 0～80km (when less than 15km, use attenuator) |
Output power:﹣8～-3dBm |
Receiving sensitivity: < ﹣36dBm |
Connector: SC(standard)／FC(optional) /ST(optional) |
Type: single-fiber / dual-fiber |
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) |
120km | Distance: 0～120km (when less than 15km, use attenuator) |
Output power:﹣3～5dBm |
Receiving sensitivity: < ﹣39dBm |
Connector: SC(standard)／FC(optional) /ST(optional) |
Type: dual-fiber |
Wavelength: 1550nm |
- - - -

?

?

Order information:

?

??
?

Tag: Standalone?Fiber Optic Media Converter,?[fiber optic ethernet converter]
?
?
Contact Person: Mandy Zhang (Trade department)
Skype: live:mandyzhang.3clink
facebook:Mandy Zhang
Web: www.3c-link.com www.ftthhome.com
Tel: +86-755-27821691 Fax: +86-755-27821701 Mob: +86-18271673598
E-mail: sales3(at)3c-link.com
More information and confusion please contact me now!! !! !! !!