Industrial Supplies Agents

Stainless Steel Laser Cutting Machine , Industrial Laser Cutter Equipment HECF3015IIWJ

?

??

?
Technical Parameter
?

- - - -
Type | HECF3015II-1000 | HECF3015II-2000 |
Output power | 1000W ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 2000W |
The medium of laser | diode-pumped continuous yb-doped fiber |
Laser wave length | 1070nm |
Power | 380V/50HZ |
Cutting area | 3000mm*1500mm |
Max cutting speed | 24m/min | ?45m/min |
Cooling method | Water cooling |
Driving System | Imported Servo Motor |
Min line Width | ≤0.125mm |
Cutting thickness | 0.2-8mm (according to material)???? |
Continuous working time | 24hours |
Weight | About 4000KG |
Dimention | 4700mm*2450mm*1750mm (length*width*height) |
Environment Temperature | ?5℃ -35℃ |
- - - -

?
Product Description ?
HECF3015II CNC Double Driver? CNC 1000W 2000W Fiber Laser Cutter?adopts the most sophisticated Germany IPG laser and double driver,?advance laser technology, computer control technology and high-performance CNC laser power system to process all kinds of metal sheet at high speed, high accurate, high efficiently cutting.

?

Related YAG and Fiber Laser Cutter Series:

Fiber I Series:?HECF3015I-500/700/1000W Sheet Metal Fiber Laser Cutter

HECF3015IT-500W Sheet Metal and Tube Cutter

Fiber II Series:?HECF3015II-1000/2000W Sheet Metal Fiber Laser Cutter

HECF3015IIWJ-1000/2000/3000W?Enclosed?Sheet Metal Cutter?with Exchangeable Table

Fiber III Series:?HECF3015III-500/700/1000W?Sheet Metal Cutterwith Exchangeable Table

YAG ?Small Format:?HECY0505B-500W?YAG Sheet metal Laser cutter

YAG ?Medium Format:?HECY1513C-500W?YAG Sheet metal Laser cutter

YAG ?Large Format:?HECY3015-650/750/850W?YAG Sheet metal cutter

HECY3015IIIWJ-500/750W?YAG Sheet metal cutter?Enclosed with Exchangeable Table

?

Fiber laser cutter advantages:

1. Excellent quality of light beam:small focus facula, fine cutting line, high working efficiency,best processing?quality.

2. High cutting speed: 2 times by co2 laser cutter with the same power.

3. High stability: adopt world top imported fiber laser souce with stable proformance, key parts lifespan could be 100,000 hours.?

4. High efficiency of photoelectric conversion: fiber laser cutter is 3 times by CO2 laser cutter, ?energy efficiency and environmental protection.?

5. Low using cost: fiber laser cutter power comsumption is only 20-30% of CO2 laser cutter under same power.

6. Low maintenance cost: without working gas for laser source; without reflecting lens for fiber transmission.

7.?Convenient operation: do not need to adjust the optical path with fiber transmission.

8. Strong soft optical effects: compact volume and structure, easy to operate flexibility.

9. Adopt Gantry double driving structure, high damping machine tool bed for higher speed and acceleration.

10.This model adopts imported AC servo system driver and imported transmission system, the moving structure of machine tool adopts imported gear and rack transmission, linear guide track for guiding, ensuring the high speed,high precision and high reliability of equipment.

11. Rack and guide adopt fullly enclosed protective device, which prevents oil free friction movement and dust pollution, enhances using life of transmission parts and ensures the precision of machine tool movement.

12. Professional laser cutter cnc control system, computer operation for precise cutting and convenient operation.
?
- - - -
Applicable Materials for Fiber & Yag Laser Cutter |
1. Stainless Steel
2. Carbon Steel
3. Alloy Steel
4. Spring Steel
5. Iron | 6. Aluminum
7. Copper 8. Silver
9. Titanium
10. Other material please contact us. ? |
- - - -

?

?

- - - -
Applicable Industries for Fiber & Yag Laser Cutter |
1.Sheet metal fabrication
2. Electrical cabinet
3. Elevator
4. Automotive parts
5. Aviation & aerospace
6. Lighting lamps
7. Metal carfts & decoration | 8. Hardware tools
9. Advertising
10. Furnitures 11. Kitchenware equipment 12. Fitness equipment
13. Medical equipment 14. Agricultural and forestry machinery ? |
- - - -

?

?

?

?

Auxiliary Equipment for Fiber Laser Cutter

?

Protecting Machine for a long term& acute;s operation.

??

?Standard Equipment?

?

?1.?Centrifugal Blower

?

Low-noise centuifugal blower?could reduce metal dust pollution caused by metal processing, to protect the employee& acute;s from get harmed.

?

2.?Air dryer

?

Regrigerated compressed air dryer?can remove water and most impurties in the air, which is the best post treatment equipment for air compressor. It can stablize the pressure of compressed air and make sure the best cutting effect.?

?

3. Water-cooling Machine??

?

Standard water-cooling machine?with small power, low consumption and high performance. Small power?water-cooling machine will be effective due to the excellent performance of sheet metal fiber laser cutter and the high photoelectricity conversion efficiency.

?

Optional Equipment

?

?

1. Air Compressor

Optional air compressor?blow and compress air during the cutting process, which can greatly?reduce the using cost.

?

?

2. Special Cutting Parts for Pipe Materials

?

?Equip with the special gripper for cutting pipe, which can drill with intersecting line and cut off the cylindrical metal pipe, and the pipe cutting diameter area is from 20mm to 250mm, which is good for broadering the utilization ratio of equipment.





Cutting Process

?

?

??

?

?

?

?

Our?Service

?

Installation and Training

Our technician is available to your factory and offer training for your operators to use our machines. As well, you may send your technician to our company to learn how to operate machines for free.

?

Quality Guarantee

We arrange final test before shipment. We run the machine in factory for a few days, and cut materials to test the performance.

?

Operating guide

Specification for machine and software will guide you to use the laser cutting machine properly, which can extend lifespan and reduce energy consumption.


Machine maintenance&Warranty
The whole set of machine warranty period is 1 year. (From the date on the B/L)

?

?

?

Our?Company

?

Wuhan HE Laser Engineering CO., Ltd. is a sino-foreign joint venture registered in Optical Valley of China in Wuhan in 2008. It is the science and technology cooperation between governments of the People& acute;s Republic of China, commonwealth of independent states (CIS) and eastern European countries. With a R&D team which is leading by Russian senior experts specializing in laser research and development, we have succeed in developing laser cutting equipments with excellent beam quality, high electro-optical conversion efficiency, high stability as well as low maintenance cost. HE Laser has gained 28 patents of invention, utility model patents and design petents, which is taking a leading position home and abroad on laser technology.

HE laser cutting machine are not only best-selling domestic but also sold to Germany, Britain, Russia, Chile, Argentina, South Korea, Singapore, India, Thailand, Taiwan and other 25 countries. In line with the business philosophy of sincerity, quality and innovation, HE Laser will constantly increase customer satisfaction. Join hands with HE Laser, get accomplishments for you and me!

??

?

Our Exihibition

?



Certificates ?

?

HE LASER got the CE Certification.

Obtained Spring Canton Fair CF Award.

Got the & quot;High New Technology Enterprise& quot;title.

HE Laser cutting machine obtained 28 patents.

Five laser cutting machine softwares obtained copyright.

HE laser& acute;s Russian technical expert was awarded& quot;Chime Award& quot;.

Got & quot;China Red Star Design Award& quot; for Yag laser cutting machine and fiber laser cutting machine.

Awarded & quot;Technology Leader& quot; for & quot;High Performance Pulse Solid Laser Cutting Machine& quot;.

In the 13th China International High New Technology Achievement Fair, HE got & quot;Excellent Product Award& quot;.



?

?

FAQ

?

Q1. Trade company or manufacturer?

A: We are manufacturer, welcome to visit our factory!

?

Q2. Is it easy to operate for the new user ?
A: It is very easy ,we offer you operating video ,also our aftermarket technician can help you via MSN ,Skype teamviewer etc.

?

Q3. What should I do when the machine is in trouble?
A: Make sure all the wires be connecting well ,and keep your lens and mirrors clean(only for Yag laser cutting machine) ,then check your laser tube and share details with us.

?

Q4: How long does it take to learn how to operate a laser cutting machine?
A: If you are able to use some basic graphic design software, it will only take a few hours, some simple tests on different processing materials are required to learn how to adjust the speed and laser power.

?

Q5: Is it harmful to human body when in operation ?
A: It is not harmful, as long as the laser won’t shoot the skin and eyes directly.

?

?

In order to provide a better offer for you, please let me know your requirements as below:

?


1) What& acute;s the materials you want to cut ?
2) The thickness of each cutting materials? max/usual thickness.
3) What& acute;s the size of metal you want to cut ?
4) What is the final products ?

5) Are you end user or machine distributor?

?

Pls feel free to contact us for more information, thanks!

?

?