Pipe & Fittings

Specification:
1.24 years manufacturing experience
2. ISO9001, ISO14001
3. Import rubber
4. China National Standards Drafting Unit of Rubber Joint
5. Qualified Joint Supplier in Nuclear Power Plant

Introduction:

The inner wall of the product is in form of smooth plane cylinder and lined with polyester cord fabrics. The outside protruding part is wire rope support ring. Its inner rubber is various medium resistance rubbers and outer rubber is normal rubber. The main functions are to prevent flatness under negative pressure and to endure short time inner pressure to avoid vibrating of inlet pipes bottom ends caused by pump power and suction vibrating so as to make the flow evenly raised and the pump power consumption reduced. Besides, because the inner walls of the rubber join are vertical with no fillisters (arching, or called big belly), it prevents swirls caused by the suction of the pump which improves the pumps efficiency.

Features:

1. This product could primarily reduce the vibration and the noise of the piping system, completely solve the different piping problems as displace of joint, axial flex and etc.
2. According to different material requirement, product could be made as acid proof, corrosion proof to suit different medium and environments.
3. The materials are good sealing, light weighting, easy to fix and maintain, also has long-working expecting. But please keep far away from sharp metal in order to avoid breaking of the rubber body.
4. For flanges of other standards or non-standards. It is necessary to be agreed upon separately. Please specify standard of furnish diagram and relative parameter. We will manufacture accordingly. Rubber material may be selected according t your requirement.
5. Anti-corrosion: EPDM and NBR rubber can bear high temperature and can anti-corrosion.
6. Double sphere flange end rubber joint: The rubber body has two bridges. It can bear more pressure and the length is long than single sphere rubber joint.