Generators

UHD 4K HDMI Extender via One CAT-5e/cat6/cat7 cable over 150meters

1. Introduction
The HDMI Extender is a tool which can extend your HDMI signal over 492ft/150m to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal which can be transmitted by CAT5e/CAT6/CAT7 cable. It also supports Transfer Bidirectional Infrared control signal and RS232 control signal. And this equipmentsupport long-reach mode (HDBaseT),Undercircumstance of long-reach mode, that can extend HDMIsignal (1080p/60Hz/24bpp) over 492ft/150meter to compatible display.


2.Features
? Fully compliant with HDMI 1.4, and compatible with HDMI 2.0 ([4K2K@60Hz] with YCbCr 4:2:0 ).
? HDCP1.4 or HDCP2.2 Based on HDMI&HDCP version of receiverand DVI compatible.
? Supports HDBaseT 2.0 standard over a single CAT5e/6/7 cable up to 492ft/150m.
? Supports HDBaseT Long Reach (LR) mode .
? Supports pass-through of HD audio formats: LPCM2/5.1/7.1 CH, Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio etc.
? PoC(Power Over Cable)function supported, either TX or RX was poweredon [24V@1A,other] unit doesn’tneed power from the DC jack.
? Full HD supported: [1080p@60Hz@24/36/48bit/pixels].
? Transfer Bidirectional Infrared control signal together with the HDMI signal.
? Transfer Bidirectional RS232 control signal together with the HDMI signal, but not being used in the hardware version.

3. Package
? HDMI Extender 100m Transmitter --------------------- 1PCS
? HDMI Extender 100m Receiver ------------------------- 1PCS
? Wideband IR Tx --------------------------------------------------------- 2PCS
? Wideband IR Rx --------------------------------------------------------- 2PCS
? 24V/1A DC power adaptor ---------------------------------------------- 1PCS
? UserManual ------------------------------------------------------ 1PCS

?

?

4.Specifications
? Video Bandwidth 340MHz/10.2Gbps
? Transmitter
Input Ports 1xHDMI In
1xIR Rx,
Output Ports 1xIR Tx
1xHDBaseT Out
? Receiver
Input Ports 1xIR Rx
1xHDBaseT In
Output Ports 1x HDMI Out
1xIR Tx
? Power Supply DC 24V 1A
? ESD Protection ± 8kV (air-gap discharge)
Human Body Model: ± 4kV (contact discharge)
? Dimensions (mm) 114(W) X 106(D) X 17 (H)
? Weight 396g/TX, 398g/RX
? Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
? Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
? Relative Humidity 20~90% RH (Non-condensing)
? Power Consumption (Max) 10W