Pipe & Fittings

Nanjing Ourgreen Single Screw XPS Production Line 135/150 for XPS Foam Board

?

?

Nanjing Ourgreen Single Screw XPS Production Line Descritpion

?

People?prefer?Single?Screw?XPS?Production?Line?at?its?early?stage,?as?Single?Screw?is?easy?to?operate,?

maintain?and?most?importantly,?the?model?meets?customers?budget.?

?

Gradually?after?customers?gain?bigger?market?share,?they?tend?to?buy?larger?machine,?which?increases?

output?and?decreases?unit?production?cost.?Customers?prefer?producing??the?same?specification?at?large?

volume,?as?changing?between?thickness?will?incur?big?waste.

?

On?the?other?hand,?there?is?always?demand?on?high?end?XPS?product,?in?this?case?Twin?Screw?XPS?

Production?Line?is?a?better?choice.

?

?

Phase-out?Plan?of?HCFC?in?China

?

From?2013,?Freeze?HCFC?production?and?consumption?to?the?average?amount?of?year?2009?and?2010?

and?set?it?as?a?Base?Amount;

By?2015,?reduce?10%?of?the?Base?Amount;

By?2020,?reduce?35%?of?the?Base?Amount;

By?2025,?reduce?67.5%?of?the?Base?Amount;

By?2030,?fully?stop?use?of?HCFCs.

?

?

- - - -
SN | Items | Quantity | Function |
1 | Simplified Double Stage?Feeding?System | 1?Set | Mixing?&?Feeding |
2 | 1st Single Screw?Extruder 135 | 1?Set | Melting?Raw?Materials |
3 | CO2 + Isobutane Injecting?System | 1?Set | CO2?+?Other?Blowing?Agents |
4 | Hydraulic?Screen?Exchanger | 1?Set | Change?Screen?Instantly |
5 | 2nd?Single?Screw?Extruder 150 | 1?Set | Cooling?Raw?Materials |
6 | Static?Mixer | 1?Set | Mixing Raw?Materials . |
7 | Mould?300MM(Slot?Die) | 1?Set | Extruding?Materials?Out |
8 | Calibrator | 1?Set | Shaping?XPS?Board |
9 | 1st?Haul-off?Unit | 1?Set | Haul-off |
10 | Cooling?Racks | 4?Sets | Cooling XPS?Board?Naturally |
11 | Width?Cutting?System | 1?Set | Cutting 600MM?Width |
12 | 2nd?Haul-off?System | 1?Set | Haul-off |
13 | Length Cutting System | 1?Set | Cutting length |
14 | Recycling?Machine | 1?Set | Recycling?XPS?to?Granules |
- - - -

?

?

Nanjing Ourgreen?Single Screw XPS Production Line?Advantages:

?

1. Low ODP, low GWP;

2. Low Production Cost;

3. Environtmental friendly XPS product;

4. Simplified Double Stage Feeding System saves labors;

5. Twin Screw better mixes all Blowing Agents and raw materials;

6.?Stable?Continuous?Running?Condition;

7.?Low?Energy?Consumption;

8.?Advanced?Blowing?Agent?Technology;

9.?Low?Failure?Rate;

10.?Easy?Maintenance.

?

?

Nanjing Ourgreen?Single Screw XPS Production Line?Models:

?

?

- - - -
Parameters | Unit | Data |
135/150 | 150/200 | 65T/150 | 75T/200 | 85T/200 | 95T/300 |
1st?Extruder | MM | SS135 | SS150 | TS65 | TS75 | 85T | 95T |
2nd?Extruder | MM | SS150 | SS200 | SS150 | SS200 | SS200 | SS300 |
Capacity | Kg/h | 250-300 | 350-420 | 300-400 | 400-600 | 450-650 | 500-700 |
M3/24h | 200-250 | 280-330 | 250-320 | 300-450 | 350-500 | 500-600 |
Installed?Capacity | KVA | 150 | 250 | 200 | 250 | 300 | 350 |
Voltage | 380V?3?Phase |
Required?Space | M | 40x12x4 | 46x15x4 | 42x10x4 | 46x12x4 | 46x15x4 | 46x15x4 |
Machine?Weight | Ton | 17 | 21 | 18 | 22 | 23 | 25 |
Note | SS:?Single-screw?Extruder TS:?Twin-screw?Extruder |
Blowing?Agents | CO2+LPG/Ethanol/HCFC/Butane/Isobutane/DME/ |
Thickness | 25-100MM?by?CO2+Other?Blowing?Agent; |
Width | 600/900/1200MM |
Length | 1200MM/2400MM/3000MM |
- - - -

?



?