Batteries & Chargers

Single/Double Side 110V-220V Vacuum Forming Outdoor Light Box for Bank
?
?
Production Information
?
1. Main support:
flectional aluminum extrusion:
Aluminum frame width:6cm / 8cm / 10cm / 11.5cm option, different color finishing is acceptable, metal feet support, mounting on the wall or hanging on the ceiling.
?
2. Image media:
Opal acrylic with silk screen printing logo or blank acrylic surface with changeable inkjet Self-adhesive backlit vinyl film poster.
?
3. Electricity:
energy saving fluorescent tube, electronic ballast, CE and UL approval is available.
?
4. Packing:
bubble bag for individual ,foam corner protection ,wooden case/carton packing is available
?
Technology: thermoform, mould sucking
?
Product Details
?

- - - -
Product | Single side 110V-240V vacuum forming outdoor light box for Bank |
Material | Aluminum frame, import acrylic board, ballast |
Durable | outdoor used; wall mounted |
Printing | 1 color or 4 color silk screen printing |
Characteristic | 1. Vacuum moulding |
2. custom shape available |
3. Frame colors: silver |
4. Voltage: 110V-240V |
Size | 5. Customized is available |
Light set | long life span lights and electronic ballast |
Certification | CE, ROSH, UL, SASO |
Application | Bank image sign, reception, ATM, chain store, bar, shopping mall, hotel, restaurant, exhibition hall, etc. |
- - - -

?
Vacuum forming progress
?
Step1. Make the plastic sheet be clamped into position which above the
vacuum forming mold inside the vacuum forming machine.
?
Step 2
The sheet is then heated by two heaters one above the sheet and one below the sheet.
This method is called sandwich heating and gives a more consistent temperature
throughout the sheet avoiding any cold areas which in turn gives you a sharper and
more defined vacuum forming .
?
Step 3
Once the sheet is heated to the correct temperature it will become pliable, the
vacuum forming mold is raised and a vacuum is applied which pulls the now
malleable plastic sheet down onto the vacuum forming mold.
?
Step 4
The vacuum is kept on while the plastic is cooled using large fans and water spray so
that it retains the shape off the vacuum forming mold.
?
Step 5
Once the plastic is cooled the vacuum is released and the plastic part removed by
gently applying a short blast of air between the vacuum forming mold and the plastic
component.
?
Step 6
Pick the plastic sheet which is finished vacuum forming out from the vacuum forming
machine.
?
Step 7
Cut the edge by CNC machine or hand.
?
Step 8
Cleaning and packing.
?
Progress as is shown in:

?
Specifications:

?

- - - -
Product Name: | Vacuum forming light box | Brand: | Weldon |
Product Application: | Bank | Material: | Aluminum, acrylic |
Size: | customized | Features: | Display any logos |
Light Source: | LED module/tube option | Frequency: | 50-60HZ |
Printing: | Anti-UV/silk screen | Light Distance: | 0-5m |
Light set: | long life span lights and electronic ballast | Frame colors: | Silver |
Voltage: | 110V-240V | Shape: | Rectangle, round, square, etc. |
- - - -

?