Silicone Rubber For Tyre Molding - e620
Silicone Rubber For Tyre Molding For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Silicone Rubber For Tyre Molding, Made in China, High Quality Products!, China Liquid silicone rubber , Silicone Rubber For Tyre Molding Supplier, Manufacturer.
Description
HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
HY-E620 Silicone Rubber is has been used for years to make tire pattern molds .
Characteristics
＊ low shrinkage (less than 0.1% )
＊high tensile and tear strength with high copy times
＊easy for operation (mixing ratio at 1:1 /10:1)
＊very good flow and easy for pouring operation
＊Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Operation instruction of HY-E Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Any questions of Silicone Rubber For Tyre Molding?, please feel free to contact ms yif :
TEL: 086-755-89948019
FAX: 086-755-89948030
MOBILE:086-15979907468
Website: www(dot)szrl(dot)net
E-MAIL: guyihuide(at)gmail(dot)com
hongyejie technological company
Address: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China, Shenzhen, Guangdong, China, 518117
Tel: 86075589948019
閵嗏偓閵嗏偓閵嗏偓Shen Zhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and marketing of silicone rubber. It set up Hong Kong Hongye Ltd. and some other affiliated enterprises in 2005.
閵嗏偓閵嗏偓閵嗏偓We are manufacturer specializing in we are leading manufacturer of rtv-2 silicone rubber in China , including silicon , silicone rubber ,rtv silicone rubber , liquid silicone rubber , condensation silicone rubber , silicone rubber for mold making , silicone rubber for manaul mold making ,silicone rubber for pad printing ,silicone rubber for potting compound , platinum cure silicone , addition cure silicone rubber,addition silicon rubber, such as silicon for baby nipple, for cake and chocolate mold making, lifecasting, trademark, prototyping, etc. HTV solid silicone, includes spin casting, hot stamping silicon plate, general purpose molding silicon rubber, etc.
閵嗏偓閵嗏偓閵嗏偓We warmly welcome all old and new customers anywhere around the world to visit our factory anytime, our aim is : Quality is the life of an enterprise. Our utmost wish is customer satisfaction. Let閳ユ獨 join hands and strive for mutual prosperity !
閵嗏偓閵嗏偓閵嗏偓
Related Products
pad printing silicone rubber?
901 902 912 916