Rubber & Products

LIQUID RTV-2 SHOE MOLD SILICONE RUBBER APPLICAITONS:
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products,products with non-complex patterns, as well as product models with stable size and non-deformation.

LIQUID RTV-2 SHOE MOLD SILICONE RUBBER FEATURES:
1.Two-component silicone rubber with tin-catalyst
2.Cured under room temperature
3.Low shrinkage
4.Excellent fexibility & easy demould

LIQUID RTV-2 SHOE MOLD SILICONE RUBBER USING INSTRUCTION:
The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.

LIQUID RTV-2 SHOE MOLD SILICONE RUBBER NOTES:
Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon , mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.

For more information, welcome to contact Lilian:
Phone: 86-13617490457
E-mail: lilian(at)xrsil(dot)com
Skype: 985280853(at)qq(dot)com
Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China