Electronic Data Systems

Self Adhesive Butyl Rubber Car Trunk Sound Deadening In Grey / Black /White
?
Product Description:
WanTai is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 4mil of pure grade aluminum! Most products on the market use 2mil. Our product will absorb sound better than the competition. If a product does not specify how much material is being used, you should be very cautious about it! Every manufacturer should know what they put into their products! Also, other products on the market such as WanTai for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our China. WanTai is made of butyl rubber and aluminum which is the same as many of the more expensive brands out there that sell for twice our price.. We do not cheat our customers. We only make top quality product
?
Sample Test:
?

- - - -
The serial number | Item | Performance | Comment |
1 | Appearance | Black, white, gray | Visual inspection |
2 | Smell | No smell | The normal temperature
Nasal olfactory |
3 | The density of | 1600kg/m3±10％ | The proportion of meter test |
4 | Hardness (Sha) | 70±5 | Shore durometer |
5 | Tensile strength (Mpa) | ≥0.5 | 500mm/min |
6 | Resistance to bending | Test samples ≥90°No cracks, no damage | 100×25×3mm |
7 | Temperature test | No cracks, no fall off | 24 house -25℃±5℃. ?24 house?-60℃±5℃. |
8 | Corrosion of steel plate | No crrosion, Steel plate no deformation | Stick on the plate 72 hours (25℃) |
9 | Harmful substances | Pb≤ 600PPm
Cd≤ 600PPm
Hg≤ 600PPm
PBB, PBDE≤ 600PPm | Refer to:
IEC62321/2nd CDV (111/95/CDV)
Cd: ICP-OES
Hg: ICP-OES
Cr: UV-Vis
PBB, PBDFE: GC-MS
Pb: ICP-OES |
- - - -

?
?
Features:
? Use for floor, door,trunk,
stereo enclosures, under dash,
inner firewall and etc
? Easy-to-install, very high-strength
adhesive butyl rubber
? Eliminate body/floor vibration
? Better audio sound quality
?
Installation:
1.Clean up the mounting surface, like the hood, trunk, floor, (for door and roof , need to remove the door panel, roof panel) with a quick-drying and residue-free solvent. Remove all dust, dirt, oil, moisture etc.
2.Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner.
( Note: work gloves should be used when handle foil backed material because the sharp edges when cut to different size)