Wall Protection

?

?

Hardened SCS13 Carbon Steel investment casting ISO9001 certificated Silica sol process.

?

?

Quick Detail:


1. ? Component of mechanical parts applied in Power Generation industry?made by precision cast process;
2. ? Material:??Carbon steel SCS13?; 3. ? Size: 80X20X5mm; 4. ? Weight: 0.029kg; 5. ? PED 97/23/EC & ISO9001:2008 certificated; 6. ? Process type: silical sol ceramic shell; 7. ? NDT such as dye test is available. ? ? ? ? Description:
?
Winnington performs carbon steel lost wax casting process and castings for other steel alloys, please refer to below table for the most common material that Winnington cast: ?
?

- - - -
Stainless Steel (70%) | Carbon Steel (20%) | Alloy Steel (10%) |
CF3M (SUS 316L), CF8M (SUS 316), CF8 (SUS 304),CD4MCu, CD4MCuN,ANC20,1.4408,1.4517, 1.4306, 303,? 430, 420, 17-4PH, SCS1 and more | SCS16, SCS14, SCS13, 1.0619, WCB, S355JR, 1045 , 1020,?LCC and more | ANC2,CLA12C,42CrMo,8Q,4140,6150 and more |
- - - -

?
?
Overview of Lost Wax Method ? ? The model of the part is made of wax from an aluminum die, then the wax patterns are welded onto the runner system which is also made of wax - it forms a pattern tree or called pattern assembly. Next, the pattern tree will be dipped into ceramic slurry of sand or stucco, with drying process between each coating until the shell is thick enough to hold the weight of molten metal which will be poured later.? ? Then the Pattern tree with wax in it is going to a high pressure oven which melt the wax out. It forms a hollow in the shell. The shell is preheated before pouring to help fluidity of melton metal. A sand bed is always aside to hold the hot poured shell.? ? In the following process, the shell is broken and removed, so the castings can be seen now. The castings are then cut off from the metal tree and shot blast/polished/machined to get better tolerance and surface.? ? ?
?
Applications:
?


Electrical

Water solution( Pumps,?Valves,?Pipe Fittings )

Medical
Automotive
Marine and Oil
Machinery
Power & Energy
Other Mechanical Parts
?
?


Specifications:

?

- - - -
Material standards | ASTM,JIS,DIN,BS,MIL |
Maximum Casting dimension | 500*500*350mm |
Casting weight range | 10g~80kg |
Wall thickness | ?Min?1.5-2mm |
Casting process type | silica sol lost wax casting |
Machining capacity | CNC machining, CNC lathe |
Surface finish type | electro polishing, satin finishing, hand polishing, pickled, zinc plating, vibration polishing; |
Tolerances standard | VDG P690 |
NDT services | Dye test, X ray test etc |
- - - -

?

?
Competitive Advantage:

?
One-stop Services of Winnington Casting that will save your time and cost:? ? We offer services from wax die making, wax injection, pouring, secondary machining, welding, heat treatment, polishing, to surface finishing etc. ?
?

?

?



?