SAF 2205 Geothermal Capillary Coiled Tubing

SAF 2205 Geothermal Capillary Coiled Tubing
Get Quote

Meilong specially manufactures welded and redrawn, seamless and redrawn coiled tubing which are made from corrosion-resistant austenitic, duplex, super duplex stainless steels and nickel alloy grades. We have been specializing in manufacturing coiled tubing used in the oil and gas industry.

Tubing for Control Lines
A direct hydraulic control umbilical provides direct hydraulic control of each valve on a subsea christmas tree, through a bundle of tubes from the topsides hydraulic power unit (HPU) to the subsea tree. No electrical power or signal is required. Actuation of valves is by the supply of hydraulic power to the relevant tube. This is accomplished by opening the relevant valve on the manifold located on the topsided HPU. This type of umbilical is limited to subsea production systems with short offsets to the host and few trees.

Thanks to the experience and expertise gained in the production and inspection, the tubes supplied by Meilong fully meet stringent quality requirements of the oil & gas industries. The tubing deployed in the umbilicals used in aggressive subsea and downhole conditions.

Tubing for Chemical Injection Lines
One of the main challenges in the upstream processes of the oil and gas industry is to protect pipeline and process equipment against waxes, scaling and asphalthane deposits. The engineering disciplines involved in flow assurance play an essential part in mapping the requirements that reduce or prevent loss of production due to pipeline or process equipment blockage. Steel tubing from Meilong is applied to umbilicals and chemical injection systems play an effective role in chemical storage and delivery at an optimizing flow assurance.

Our tubing is characterized with integrity and quality to be specially used in subsea conditions in the industries of oil and gas extraction.

Available Alloy Grades for Control Line Tubing
Austenitic: 316L
Duplex: S31803/S32205
S32750
Nickel alloy: N08825
N06625


Hydraulic Control Line Tubing Features
Close dimensional tolerances
Enhanced mechanical properties
Superior surface finish
High cleanness of inside surface
Controlled ovality, eccentricity

Coiled Tubing Dimension
Outside Diameter: 1/8’’ to 1-3/4’’ (3.175 mm – 44.45 mm)
Coiled tubing length: up to 32,808 feet (10,000 m)
Tubing with minimum orbital welds reduces the risk of leakages when connecting tubes, and suitable for delivery for customers need.
Single coiled tubing is available
The tubes are delivered with plastic caps for protection from potential contamination during storage.

Meilong specially manufactures welded and redrawn, seamless and redrawn coiled tubing which are made from corrosion-resistant austenitic, duplex, super duplex stainless steels and nickel alloy grades. We have been specializing in manufacturing coiled tubing used in the oil and gas industry.

 

Tubing for Control Lines

A direct hydraulic control umbilical provides direct hydraulic control of each valve on a subsea christmas tree, through a bundle of tubes from the topsides hydraulic power unit (HPU) to the subsea tree. No electrical power or signal is required. Actuation of valves is by the supply of hydraulic power to the relevant tube. This is accomplished by opening the relevant valve on the manifold located on the topsided HPU. This type of umbilical is limited to subsea production systems with short offsets to the host and few trees.

 

Thanks to the experience and expertise gained in the production and inspection, the tubes supplied by Meilong fully meet stringent quality requirements of the oil & gas industries. The tubing deployed in the umbilicals used in aggressive subsea and downhole conditions.

 

Tubing for Chemical Injection Lines

One of the main challenges in the upstream processes of the oil and gas industry is to protect pipeline and process equipment against waxes, scaling and asphalthane deposits. The engineering disciplines involved in flow assurance play an essential part in mapping the requirements that reduce or prevent loss of production due to pipeline or process equipment blockage. Steel tubing from Meilong is applied to umbilicals and chemical injection systems play an effective role in chemical storage and delivery at an optimizing flow assurance.

 

Our tubing is characterized with integrity and quality to be specially used in subsea conditions in the industries of oil and gas extraction.

 

Available Alloy Grades for Control Line Tubing

Austenitic:

316L

Duplex:

S31803/S32205

S32750

Nickel alloy:

N08825

N06625

 

 

Hydraulic Control Line Tubing Features

Close dimensional tolerances

Enhanced mechanical properties

Superior surface finish

High cleanness of inside surface

Controlled ovality, eccentricity

 

Coiled Tubing Dimension

Outside Diameter: 1/8’’ to 1-3/4’’ (3.175 mm – 44.45 mm)

Coiled tubing length: up to 32,808 feet (10,000 m)

Tubing with minimum orbital welds reduces the risk of leakages when connecting tubes, and suitable for delivery for customers need.

Single coiled tubing is available

The tubes are delivered with plastic caps for protection from potential contamination during storage.

 

 


Send A Message
*If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.