Materials Handling

TG1000C?Shot Blasting Equipment?Stone Shot Blasting Machine 1. Function & Application # Surface adhering substance removing and?texturing for marbles, granites, dinas, slates and
? ? ? ? ? other rocks?which cant be flame-treated. # Internal stress eliminating.?
# Surface burnishing
2. Main Components? # Material sending roller conveyor
# Material sending entrance 12m
# Main shoting room 4m, vice shoting room 4+4m, auxiliary room 5+5m
# Blowing room 2.5m
# Exit three zones 12m
# Impeller head
# Helix conveyor
# Hoister and splitter
# Shots sending system and circulating system
# Dust collector
# Electrical control system : PLC
3. Working principle # The speed adjustable?roller conveyor?sends the stones?into?the main shotting room and?vice
? ? ? ? ? shotting room. # The shots from the?impeller head come?out from different coordinates and intensively
? ? ? ? ? shot?on?the stones?in the shotting room, removing the surface adhering substance. # Moving through the blowing room, and blowed by manually operated blower gun, until moving
? ? ? ? ? out. # The helix conveyor sends the blowed shots, shotting rust and dust?to?the bottom of the
? ? ? ? ? hoister,?and be sent to?the splitter?by the hoister for winnowing splitting. # The splitted?clean shots be sent to?the shot-collecting backetand kept for circulated use. The
? ? ? ? ? unsplitted mixings go back to the splitter for re-splitting. # The dust sucked by blower to dust collector,?filtering clean air out and dust to the dust
? ? ? ? ? collecting box which can be cleaned regularly. 4. Main Parameters?
- - - -
?Description ? ? ? ? ? ?? | ?TG1000C Roller Converyor Shot Blasting Machine For Stone Surface Surface Shot Blasting |
?Model No. | ?TG1000C |
?Effective cleaning width | ?1000 MM |
?Dimension of inlet opening | ?1000 MM x 350 MM |
?Length | ?1200 MM - 12000MM |
?Roller speed | ?0.5 - 4 M/MIN |
?Thickness of stone | ?3 MM - 60MM |
?Impeller quantity | ?2-8 pieces, choosable |
?Ventitation | ?10000 M3/H |
?Electrical Controlling | ?PLC (Delta) & HMI |
- - - -

?

5. Specialty
# Uniform?size for shots ensures uniform processing quality and surface pattern for the stones.
# Shots made of nickel-cadmimum alloy instead of normal shots which will cause?rust on stone
? ? ? ? ? surface? # Environmental-friendly processing : replacing quartz sand blasting
# Cost effective : 0.4 - 0.65rmb/m, including power consumption, shots consumption, machine
? ? ? ? ? wearing?(take example of?marble) # Efficient : Material sending speed 1m/min (granite) to 3m/min (marble).
# Can process many kinds of stones such as marbles, granites, dinas, slates and other rocks
? ? ? ? ? which cant be flame-treated. # Can also process kinds of metal plates.

6. Features & Advantaes of Our Shot Blasting Machine
# Taiwan technology
# Core components all sourced from internaional brands.
# Use Taiwan high wear-resistance?impeller head, wear-resistant parts can be used for 1500-
? ? ? ? ? 2500 hours. # Main shoting room use?high wear &?blasting?resistant?steel guard plate,?high chromium
? ? ? ? ? molybdenum?alloy?with 26.5-28% chromium. Lifespan 2-3 years. # Vice shoting room use high Mn alloy steel guard plate, lifespan 10 years.
# Belt use recently developed Taiwan?high wear-resistance rubber?belt?with reinforcing steel
? ? ? ? ? wire layer, no joint. Lifespan 2 years. # Every import transmission parts have proximity switches?to avoid further work when there is
? ? ? ? ? any fault. # Pulse bag dust collector collecting bag and electro-magnetic pulse valve from Taiwan.
# Winnowing splitter?inside special design give 99% splitting rate. Pneumatic controller controls?

? ? ? ? ? shots uniform flow, avoiding?too much shots destroy?motor or too less shots cant work well.
# Conveyor?and helix power adopt Taiwan Chengbang reducer. Conveyor lifespan 2 years,

? ? ? ? ? helix?lifespan 7200 hours.
# PLC electrical control system.
# Economical shots?consumption. With 3 classes full flow curtain hammer style shots

? ? ? ? ? reclaim system. The shots will be?cleaned and recycled to use, reducing disposal and minimizing

?

? ? ? ? ? abrasive costs.
6. Photos
??

??

?

?