Optoelectronic Displays

RoHs Pure white T8 LED Glass Tube ?high brightness 50 / 60Hz
?
?
Features:
1. Perfect?light?quality?design,?system?efficacy?>?100lm/W?,?can?replace?traditional?fluorescent?tube?light.
2. Very?even?light?output,?no-glare?design.
3. Universal power?input?range?of 85~265?VAC.
4. Very?nice?design,?high?quality glass??material?body.
5. Environmental?friendly.?RoHs?Compliant?
6. The?color?temperature?follows?ANSI?C78.337?Standard.
?
Application:
The?commercial?application?place?where?need?high?lux?level?but?soft?can?clear?light?quality,?
such?as?big?shopping?mall,?hospital,?office,?factory,?school,?airport,?etc.?
?
Specifications:?
- - - -
Item?No. | RE-GT8-9L6 | RE-GT8-12L9 | RE-GT8-18L12 | RE-GT8-22L15 |
LED?Tube | T8?tube | T8?tube | T8?tube | T8?tube |
LED?Chip | SMD2835 | SMD2835 | SMD2835 | SMD2835 |
Power | 9W | 12W | 18W | 22W |
Length | 600mm | 900mm | 1200mm | 1500mm |
Light?output | >900lm | >1200lm | >1800lm | >2200lm |
Body?Material | ?? Glass | Glass | Glass | Glass |
CRI | ≥80 | ≥80 | ≥80 | ≥80 |
Color?Temp. | 2700-6800K | 2700-6800K | 2700-6800K | 2700-6800K |
Power?Supply | AC?85-265V | AC?85-265V | AC?85-265V | AC?85-265V |
? Working
?Frequency | 50/60Hz | 50/60Hz | 50/60Hz | 50/60Hz |
Power?Factor | >0.95 | >0.95 | >0.95 | >0.95 |
Beam?Angle | >300° | >300° | >300° | >300° |
Working?Temp. | -10~50℃ | -10~50℃ | -10~50℃ | -10~50℃ |
Working?Lifetime | >25,000?hours | >25,000?hours | >25,000?hours | >25,000?hours |
Certificate | CE,RoHS | CE,RoHS | CE,RoHS | CE,RoHS? |
- - - -

?
Light Source Test Report

Dimmension(unit:mm)

nstallation instructions


Attention
? ? ? ? ? ◆?LED fluorescent tube can be used in the traditional T8, T10 stents. (just) the starter off;
?? ? ? ? ?◆?LED fluorescent tube must use the correct voltage according to specification;
?? ? ? ? ?◆?Do not open the led tube by yourself;
?? ? ? ? ?◆?We recommend you remove the inductive ballast, for indoor use;
?? ? ? ? ?◆?Such led tube cannot replace emergency light
?? ? ? ? ?◆?We recommend that the suitable working temperature should be -20?C ~ + 40?C for?our ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?led?tube,??if exceed this range, will bring bad situation for product lifetime.
?? ? ? ? ?◆?The product installation & maintenance should be operated by professional workers
?
Remark
? ? ? ? ??This product performance is being improved unceasingly, like has the change, not separate
? ? ? ? ? ? ?informs even slightly.
?
?Competitive Advantage:
#
? ? ◆?high power LED source with low attenuation;
? ??◆?Low power consumption, highly efficiency, highly antistatic;
? ??◆?saving energy and protection environment;
? ??◆?No fluorescent flickering;
? ??◆?No RF interference, no buzzing noise;
? ??◆?No coating falling off, color change, anti back flow;
? ??◆?Blue-ray resistance without human hazard and provide eye protection;
? ??◆ CE/ROHS approval.