Industrial Supplies Agents

?
?
2000L Half Pipe-coiled pipe glass lined reactor , Factory manufacture reactor
?
?
Specifications:
Gearing device
? ? ? ? ? ? ? ? ? ? ? ? ? ?Motor: 380V, 50Hz, three phrase, 5.5KW motor, explosion-proof level dⅡBT4.
? ? ? ? ? ? ? ? ? ? ? ? ? ?Reducer: SEW vertical gear reducer,Rack: DJ-80
? ? ? ? ? ? ? ? ? ? ? ? ? ?Mechanical seal: 212F dry running single mechanical seal,MIYOU,MIYOU
? ? ? ? ? ? ? ? ? ? ? ? ? ?Agitator: glass-lined gate type agitator, 85 rpm speed

Accessories: Clamp: Galvanized forge piece clamp, with protecting ring

Flange: Galvanized loose flange equipped to glass lined nozzles

Blind plate: Spare nozzles equipped with temporary blind plate

Gasket: Asbestos/corrugated stainless steel gasket, wrapped with PTFE

Flush valve: glass-lined flush valve,DG125/80 with PTFE gasket, manual, with tantalum tip
? ? ? ? ? ? ? ? ? ? ? ? ?Thermowell: glass-lined thermowell with tantalum tip
? ? ? ? ? ? ? ? ? ? ? ? ?Steel plate material: Q245R
? ? ? ? ? ? ? ? ? ? ? ? ?Enamel: Wendel GmbH cover coat G 3084/SB-RM3, ground coat CG 4033/RM 10

Spark test: glass lining effective working face tested with 20 KV spark, customer

re-inspection with 7KV spark.

External surface treatment: pained with 1 red base coat, 1 grass green top coat.

Packaging and transportation:

After complete machine installation and debugging in manufacturer factory, reactor will

be fixed and packed. Container car will load the reactor from manufacturer, and pull to

Shanghai Port (FOB Shanghai).

Controller cabinet: customers provides for themselves.
?
?

- - - -
?
Design pressure | Internal | Packing Seal | 0.2MPa |
Mechanical Seal | 0.4Mpa/1.0Mpa |
Jacket | 2MPa |
?
Design temperature | Internal | -20℃~+200℃ |
Jacket | -20℃~+200℃ |
?
?
Agitator Speed | Anchor type,frame type | ?
63r/min |
Oar Type | 110r/min~130r/min |
Impeller Type | 110r/min~130r/mi |
- - - -

Design and Acceptance
Designed and fabricated according to GB150-2011 Pressure Vessel, glass lining is coated according to China National Standard GB25025-2010 Glass-lined Equipments Technical Specifications, and complies with Stationary Pressure Vessel Safety Technology Supervision.
Spark test
Glass lining effective working face tested with 20 KV spark, customer re-inspection with 7KV spark.
Packaging and transportation
After complete machine installation and debugging in manufacturer factory, reactor will be fixed and packed. Container car will load the reactor from manufacturer, and pull to Shanghai Port .
?
?
Lead time
90 days after contract signed, drawings confirmed and deposit transferred.
Subject to receipt the export permission in time.
?
Payment
T/T;
30% net cash within one week after contract being signed;
70% net cash before shipment.

?
Quality guarantee period
12 months after start up, latest 18 months after delivery for saving. If quality problem occurs during guarantee, the Seller is only responsible for repair free of charge. If the damage is due to misoperation of the Buyer or exceeding the working condition of glass-lined equipment, the Buyer shall be responsible for the relevant charges.
?
Secrecy and confidentiality
Before or during the Contract period one party (“Discloser”) has ever disclosed or may disclose the confidential information to another party (“Receiver”). During the Contract period and the following two years Receiver shall keep secret on the confidential information and not use the confidential information out of other purpose not specified in the Contract.
?
Service

* Before shipment from Jiangsu Industry Enamel, all equipments will be tested by our professional technicians, according to technological process. Specification accordance is qualified by internal authentication. Customer can come to us for inspection at right time.

* We emphasize that, glass-lined equipments must be installed by qualified professional installing companies, with experienced technicians. Unloading, carrying, lifting & equipment final locating must be carried out rightly. This quotation does not include oversea field instruction service, and installation labor should be carried out by installing companies.

* Project manager from Jiangsu Gongtang is in full charge. He/she will be responsible for good communications and interactions between customers and Jiangsu Gongtang.
?
It’s our honor to submit above offer to you and would highly appreciate your granting us order.
?
Yours sincerely
?
Jiangsu Gongtang
?
?

Description:
?
The Half pipe -coiled glass lined reactor enjoys wide applications in the dye, food ,pesticide, chemical ,petrochemical, pharmaceutical and other industries..Jiangsu Gongtang provides you with excellent half pipe-coiled Glass lined reactor.
The Contrast of half pipe-coiled Glass lined reactor and out jacket glass lined reactor:
# # Vessel type and Safety: half pipe-coiled Glass lined reactor is belong to stationary heating or cooling operation, For the safety, half pipe-coiled Glass lined reactor is more safer.
# The effect of heat transfer: Although the heat exchange area of outside half pipe-coiled pipe is 1/3 smaller than the outside jacket. The flow rate is 2 to 3 times quicker than the outside jacket, in fact, improve the effect of heat transfer. The outside jacket have some problem such as the heat transferring medium is easy to form disturbance flow, short circuit, non uniform heat exchange and so on. However, outside half pipe-coiled pipe do not have these faults. So, for the liquid heat and cold medium, The effect of heat transfer of outside half pipe-coiled pipes is more remarkable. In addition, for the steam heat style, considering the influence of pipe group, the outside jacket is better.
# Stiffness : half pipe-coiled pipes strengthen the stiffness of the reactor, outer half coil belongs to open type heating transfer method with high speed flow, reducing the outer pressure for the inner jacket body, increasing the stiffness of reactor actually.
# The contrast of corrosion resistance: while using the cooling water, the corrosion can be easily formed under the ion erosion of ion H+,CL-,which will lead the solution precipitation and corrosion when we are in the condition of using out jacket type; If we use the half pipe-coiled pipes, the precipitation will not easily formed with the help of high speed flow with the upper-lower path. Of course, the pipe wall will not be corroded.


?
?
?
Competitive Advantage:
?
With the development of these days our second new factory which produced exportd products has been used,by using BAO STEEL and Germany Wendel enamel,our products have very good quality with the best cost performance .In the new factory,we use vertical 50000L electric furnace to enamelling buring the products by using the computer to control which make the products buring in a very good condition


?
?

Main dimension of Half pipe -coiled Glass lined Reactor

- - - -
Volume | 300 | 500 | 1000 | 1500 | 2000 | 3000 | 5000 | 6300 | 8000 | 10000 |
ltem |
D | 800 | 900 | 1200 | 1300 | 1300 | 1600 | 1600 | 1750 | 1750 | 2000 | 2000 |
D1 | 900 | 1000 | 1300 | 1450 | 1450 | 1750 | 1750 | 1900 | 1900 | 2200 | 2200 |
D2 | 1032 | 1148 | 1488 | 1639 | 1675 | 2044 | 2044 | 2218 | 2218 | 2500 | 2533 |
D3 | 560 | 630 | 840 | 910 | 910 | 1120 | 1120 | 1225 | 1225 | 1400 | 1400 |
D4 | 720 | 810 | 1080 | 1180 | 1180 | 1440 | 1440 | 1580 | 1580 | 1800 | 1800 |
D5 | 350 | 350 | 400 | 400 | 400 | 450 | 450 | 450 | 450 | 510 | 510 |
D6 | 65 | 65 | 80 | 80 | 80 | 95 | 95 | 95 | 95 | 110 | 110 |
D7 | 23 | 23 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 36 | 36 |
H | 800 | 1000 | 1200 | 1400 | 1745 | 1739 | 2700 | 2317 | 3025 | 3120 | 3460 |
H0 | 2530 | 2759 | 3222 | 3440 | 3785 | 4073 | 5115 | 4792 | 5850 | 5450 | 6270 |
H1 | 1050 | 1050 | 1240 | 1240 | 1240 | 1454 | 1535 | 1535 | 1535 | 1650 | 1700 |
H2 | 380 | 409 | 482 | 500 | 500 | 580 | 580 | 640 | 640 | 720 | 710 |
H3 | 260 | 270 | 300 | 330 | 330 | 330 | 330 | 330 | 330 | 420 | 355 |
H4 | / | / | / | 960 | 1335 | 1242 | 2000 | 1490 | 1700 | 2000 | 2650 |
H5 | / | / | / | / | / | / | 700 | 420 | 700 | 900 | 880 |
H6 | 390 | 420 | 500 | 600 | 600 | 700 | 700 | 700 | 815 | 850 | 850 |
B1 | / | / | / | 507 | 507 | 614 | 614 | 550 | 550 | 550 | 540 |
B2 | 250 | 270 | 350 | 350 | 370 | 370 | 370 | 370 | 370 | 400 | 450 |
Power(KW) | 1.5 | 3 | 4 | 4 | 4 | 5.5 | 7.5 | 7.5 | 11 | 11 | 11 |
- - - -


Nozzle size of Half pipe -coiled Glass lined Reactor

- - - -
Volume | 300 | 500 | 1000 | 1500 | 2000 | 3000 | 5000 | 6300 | 8000 | 10000 |
ltem |
a | 125 | 150 | 300×400 | 300×400 | 300×400 | 300×400 | 300×400 | 300×400 | 300×400 | 300×400 | 300×400 |
b | 100 | 100 | 125 | 125 | 125 | 150 | 150 | 150 | 150 | 200 | 200 |
c | 65 | 65 | 100 | 100 | 100 | 100 | 100 | 125 | 125 | 200 | 200 |
d | 80 | 80 | 100 | 100 | 100 | 100 | 100 | 125 | 125 | 200 | 200 |
e | 65 | 100 | 100 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 |
f | 65 | 125 | 125 | 125 | 125 | 125 | 125 | 150 | 150 | 125 | 125 |
g | 65 | 100 | 100 | 100 | 100 | 100 | 100 | 125 | 125 | 150 | 150 |
h | / | / | 100 | 200 | 125 | 125 | 125 | 150 | 150 | 125 | 125 |
k | / | / | / | / | / | / | / | / | / | 150 | 150 |
i | 80 | 80 | 100 | 100 | 100 | 125 | 125 | 125 | 125 | 125 | 150 |
L1-L3 | 25 | 32 | 32 | 40 | 40 | 50 | 50 | 65 | 65 | 65 | 65 |
N1,N2 | / | / | / | 50 | 50 | 50 | 65 | 65 | 65 | 65 | 65 |
N3 | / | / | / | / | / | / | 65 | 65 | 65 | 65 | ? ? 65
? |
- - - -