Pneumatic Components

Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder

?

Introduction of Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder

?

It consists of automatic feeding system/single screw extruder/die head/forming machine /winder. It is mainly produce PE/PP/PVC single corrugated tube. The PE/PP/PVC single corrugated tube is mainly used in the golf course, playgrounds as light load of drainage, floods; Interior decoration cable casing; Automotive wire casing; The washing machine, air conditioner drain; Prestressed concrete special tube, etc.
?

Features of PE/PP/PVC Single Wall Pipe / Tubes:


1). It has good flexibility: to resist distortion, bending good performance Acid, lubricating oil, cooling fluid, etc
2). Exterior luster, friction resistance
3). Carrying capacity is strong, can bear the weight of the foot, doesn& acute;t break, deformation, can quickly recover, and itself without any damage
?

Features of?Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder:

?

1). Adopt Electric-magnetic heater which can save 40% to 60% electric energy .
2). All electric parts ( breaker/relay/ inverter ) is SIEMENS/SCHNEIDER/OMRON
3). PLC control and simple operation?
4). The forming machine has 38 pairs to 72 pairs forming block.
5). Production speed is 15m/min to 25m/min.


Technical Parameter of?Plastic PVC PP PE Single Wall Corrugated Pipe Production Line / Making Machine / Extruder:

?

- - - -
pipe diameter(mm) | 4-10 | 9-32 | 16-63 |
Extruder | SJ-30 | SJ-45 | SJ-65 |
L/D | 30:1 | 30:1 | 30:1 |
Max output(kg/h) | 10 | 40 | 80 |
Main motor power(kw) | 4 | 11 | 18.5 |
Corrugator power(kw) | 1.1 | 1.5 | 2.2 |
Mold Quantity | 40 | 44 | 44 |
Cooling type | water and air cooling | water and air cooling | water and air cooling |
Line speed(m/min) | 6-10 | 8-12 | 8-15 |
Counting type | sense counting | sense counting | sense counting |
Winding type | Motor-driven | Motor-driven | Motor-driven
? |
- - - -

?



Technology?and?Service:
?
1.Seller?supply?full?set?of?technical?document,?cutter?and?other?full?document?(write?in?English)?for?the?extrusion
?machine.
2. Seller?supply?training?for?buyer& acute;s?staff?until?buyer?can?produce?the?eligible?production?independently.
3. Seller?is?responsible?for?installing,?testing,?adjusting?and?debugging?the?machines?in?buyer& acute;s?factory.
4. Buyer?should?pay?the?expense?for?our?engineers?including?for?our?engineer?including?round-?way?tickets,?
inland?traffic,?lodging?and?boarding?fee?when?the?machine?is?installed,?tested?and?maintained.
5. Seller?will?go?to?install?machines?after?the?machine?is?arrived?at?buyer?and?buyer?will?have?prepared?all?
conditions?(including?power,?water,?compress?air,?tools?and?materials?for?producing?pipe,?etc)?for?installing?and
?testing?these?machines.Buyer?should?pay?60USD/day.
6. When?installing,?people?of?both?sides?cooperate?well?and?carefully,?buyer?supplies?convenient?working?
condition,?any?problem,?should?discuss?peacefully?and?kindly.
7. Buyer?supply?proper?working?tools,?equipments?and?other?conditions.
8. The?expense?including?the?accommodation?and?materials?of?the?trial-run?the?machine?for?testing?and?other?
expenses(electric,?water,?air?and?worker)?will?be?on?seller& acute;s?account,??if?the?buyer?or?their?representatives?do?
the?inspection?of?the?machines?before?shipment.
9. Guarantee?period:14?months?after?shipment?(the?date?of?B/L)