Steel Section Strapping Machine For Sale

Post Time: 2017-05-05
Steel Section Strapping Machine For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Steel Section Strapping Machine, Made in China, High Quality Products!, China Steel section strapping machine, profile steel strapping machine, profiled bar strapping machine Supplier, Manufacturer.


Section bar strapping machine


Model MLXD-650 / 6.5 automatic steel wire strapping machine: mainly applicable to the packing of steel baling. The machine uses the high-speed hot-rolled wire rod with diameter of 5.5mm to 7mm as the strapping packing belt, which has the characteristics of high safety, high efficiency, tightening force, good kink quality, low failure, and low maintenance cost. Comprehensive performance indicators in the industry-leading level.


Technical data:

1, bundle diameter range: 200 * 200 - 650 * 650mm

2, packing weight: 1500KG - 6000KG

3, packing shape: rectangular

4, for steel specifications: steel

5, packing object temperature: ≤ 500 ℃

6, wire material and specifications: Q195, specifications Φ5.5 - Φ7 (recommended Φ6.5) of the hot-rolled wire rod.

7, Binding mode: single-winding, single knot

8, tied wire twist angle: 630 °.

9, single-channel bundled time: <15 seconds.

10, the working environment temperature: -10 ℃ - 40 ℃

11, control: manual and automatic. Interlocking with the production line communication.

12, equipment weight: 5 tons.

13, power: three-phase four-wire AC380V + PE 50HZ

14, the total installed capacity: 16KW.

15, the device dimensions: 3600x1250x2050.


Technical characteristics:

(1) If the bundles are not tight, the products are easy to be bundled during the hoisting and transportation. The tightening method of the cylinder is adopted by the Company, so the tightening force of the binding is greatly improved. Tight and round.

(2) The company after the completion of the rod in the kink, an increase of the film device, reducing the degree of kink and equipment hanging touch, kink quality.

(3) The wire feeding mechanism can adjust and control the oil cylinder, and it is more simple and convenient to wear the wire. The wire rod conveying adopts the double wheel structure, which increases the wrapping angle and the wire rod conveying is more stable.

(4) The thread guide groove has been improved and the guide angle of the interface is increased. The guide groove is ensured by the integral processing way of the guide groove; the guide wheel on the guide groove adopts the structure of suspension installation, metal can automatically flow out; Therefore, an effective solution to the problem of wire rod blocking to ensure that the wire rod transport more fluid.

(5) whether the wire rod in place, at home and abroad are generally used indirect testing methods, sometimes because of the quality of the wire rod is not good or slippery and other reasons, affecting the detection reliability. The company uses a unique wire rod in place direct detection of patented technology, direct detection of wire rod, the detection is extremely accurate and reliable, effective solution to the resulting bundles of failure, automatic bundling work more stable.

(6) a good structural design and manufacturing process to ensure that the use of optimized detection and control technology, so that Hu Ju automatic strapping strapping more smoothly, its faster and more efficient.

(7) hydraulic system using air-cooled, on-site without water. The hydraulic pipe are installed by card sets, hydraulic cylinder seals are imported seal to ensure that the hydraulic system is reliable, to the hydraulic system without leakage.

(8) The company automatically bundles the machine to install simply, only needs the user to provide 380V three power connections then.


Tags: Steel section strapping machine, profile steel strapping machine, profiled bar strapping machine

Get Quote

LS Heavy Industry Engineering Co., Ltd.

Address: LS Group High Tech Equipment Industrial Park, Lanzhou New Area, Lanzhou City, Gansu, China,
Tel: +86-512-5832 8328
 We are proud of our Made-in-China, serving the world

LS Heavy Industry Engineering Co., Ltd. is a modern company based on LS Group, a long history and most famous open-die forging solution supplier in China. We are renowed for the high performance, reliability, stability of machine products and professional fit-to-customer-think service. The know-how helps us develop more state-of-the-art forging equipment as well as build trust and confidence from our customers. A large number tailor-made forging units have been completed through the relations between us and end users. Now we have constructed the largest facilities for planning, production, administration and after-sales service in China. A more quick response on whatever which including design, manufacture, delivery comes true. To-be-better shall always be motto for our development.

Related Products

Cooling Bed

Cooling bed according to the specifications of the production of steel to distinguish between a small rod cooling bed, the bar cooling bed, the big stick coolin......

Round Steel Bar Weighing Machine

Bar weighing platformFinishing equipment in the collection area after the cold shear (or flying shear), by the ruler, finishing the collection area before the r......

Steel Bar Weighing Machine

Bar weighing platformFinishing equipment in the collection area after the cold shear (or flying shear), by the ruler, finishing the collection area before the r......

Flat Steel Palletizing Machine

Flat Steel Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of autom......

Steel Tube Palletizing Machine

Steel Tube Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of autom......

Profile Steel Palletizing Machine

Steel Section Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of au......

Steel Section Palletizing Machine

Steel Section Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of au......

Steel Bar Chamfering Machine

Steel bar chamfering machineOur self-developed flat-roller grinding wheel chamfering machine is used to chamfer the ends of the round steel, remove the burr bur......

Steel Bar Automatic Bundling Machine

Bar bundling machineThe bundlingmachine is used for preforming and bundlingof rebar and bar before binding, to create conditions for automatic baling or manual ......

Steel Section Strapping Machine

Section bar strapping machine Model MLXD-650 / 6.5 automatic steel wire strapping machine: mainly applicable to the packing of steel baling. The machine uses th......

Steel bar bundling machine

Steel bar strapping machine MLKDA-400/200 automatic wire strapping machine: mainly applicable to small and medium-sized bar bundles of packaging. The machine us......

Steel bar strapping machine

Steel bar strapping machineModel: MLLS-420 / 6.5Application: It is mainly applied to the packing of small bars. The machine uses the high-wire hot-rolled wire r......

63000kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

50000kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

40000kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

31500kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

25000kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

16000kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

10000kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

4000kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

6300kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

3150kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

2500kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

1600kN Direct Motor Drive Screw Press for Hot Forging

The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......

40MN Dished Head Hydraulic Press

40MN HydraulicPress for Forming Dished HeadLS Heavy IndustryEngineering Co., Ltd. designs and manufactures 40MN hydraulic press used in pressurevessels. The pus......

2500MN Dished Head Hydraulic Press

2500MN HydraulicPress for Forming Dished HeadLS Heavy IndustryEngineering Co., Ltd. designs and manufactures 2500MN hydraulic press used in pressurevessels. The......

100MN Dished Head Hydraulic Press

100MN HydraulicPress for Forming Dished HeadLS Heavy IndustryEngineering Co., Ltd. designs and manufactures 100MN hydraulic press used in pressurevessels. The p......

300MN Hydraulic Press for Cold Shaping Sheet Metal

300MN HydraulicPress for Sheet Metal ShapingThe 300MN hydraulic press is specially designed forultra high strength sheet metal shaping for plate type heat excha......

63MN Horizontal Extruding Press

LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extruding presses which perfectperformed in the famous seamless stainless steel......

45MN Horizontal Extruding Press

LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extruding presses which perfectperformed in the famous seamless stainless steel......

16MN Horizontal Extrusion Press

LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extrusion presses which perfectperformed in the famous seamless stainless steel......

25MN Horizontal Extruding Press

LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extruding presses which perfectperformed in the famous seamless stainless steel......

36MN Horizontal Extrusion Press

LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extrusion presses which perfectperformed in the famous seamless stainless steel......

Multi-Directional Extrusion Press for Valve Body

Multi-Directional Extrusion Press for Valve BodyLS Heavy IndustryEngineering Developed new generation multi-directional extrusion pressespecially used for hot v......

12000mm Radial and Axial Ring Rolling Mill

12000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs t......

10000mm Radial and Axial Ring Rolling Mill

10000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs t......

9000mm Radial and Axial Ring Rolling Mill

9000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

8000mm Radial and Axial Ring Rolling Mill

8000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

6300mm Radial and Axial Ring Rolling Mill

6300mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

5000mm Radial and Axial Ring Rolling Mill

5000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

3500mm Radial and Axial Ring Rolling Mill

3500mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

3000mm Radial and Axial Ring Rolling Mill

3000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

2500mm Radial and Axial Ring Rolling Mill

2500mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

2000mm Radial and Axial Ring Rolling Mill

2000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

1600mm Radial and Axial Ring Rolling Mill

1600mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

1250mm Radial and Axial Ring Rolling Mill

1250mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

1000mm Radial and Axial Ring Rolling Mill

1000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......

630mm Radial and Axial Ring Rolling Mill

630mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs tob......

Radial Forging Machine

RingRolling MachineLS Heavy Industry Engineering Co., Ltd.designed the first set of radial forging machine in China. It is combined withstate-of-the-art design,......

Integrated Open Die Forging Unit

IntegratedOpen Die Forging UnitFor highest forging efficiency in allforging cycles, especially in bar production, rail-bound forging manipulator(s)integrated wi......

500kN Railbound Forging Manipulator

500kNRailbound Manipulator for Open Die Forging500kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety......

300kN Railbound Forging Manipulator

300kNRailbound Manipulator for Open Die Forging300kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety......

200kN Railbound Forging Manipulator

200kNRailbound Manipulator for Open Die Forging200kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety......

160kN Railbound Forging Manipulator

160kNRailbound Manipulator for Open Die Forging 160kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variet......

50kN Railbound Forging Manipulator

50kNRailbound Manipulator for Open Die Forging50kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety o......

Move Cylinder Open Die Forging Press

MoveCylinder Hydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd.moving cylinder type open-die forging presses are the best solution for ......

Four-Column Open Die Forging Press

Four-Column Hydraulic Press for OpenDie ForgingBesides two-columnforging press, LS Heavy Industry Engineering Co., Ltd. also designs andmanufactures push down t......

50MN Two-Column Open Die Forging Press

50MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd. 50MN push-down hydraulic forging presses with two rectangular columns aredirectl......

45MN Two-Column Open Die Forging Press

45MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd. 45MN push-down hydraulic forging presses with two rectangular columns aredirectl......

35MN Two-Column Open Die Forging Press

35MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd.35MN push-down hydraulic forging presses with two rectangular columns aredirectly......

31.5MN Two-Column Open Die Forging Press

31.5MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd.31.5MN push-down hydraulic forging presses with two rectangular columns aredire......

25MN Two-Column Open Die Forging Press

25MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 25MN pull-down hydraulic forging presseswith two rectangular columns are di......

20MN Two-Column Open Die Forging Press

20MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 20MN pull-down hydraulic forging presseswith two rectangular columns are di......

16MN Two-Column Open Die Forging Press

16MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 16MN pull-down hydraulic forging presseswith two rectangular columns are di......

12.5MN Two-Column Open Die Forging Press

12.5MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 12.5MN pull-down hydraulic forging presseswith two rectangular columns ar......

10MN Two-Column Open Die Forging Press

10MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 10MN pull-down hydraulic forging presseswith two rectangular columns are di......

8MN Two-Column Open Die Forging Press

8MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 8MN pull-down hydraulic forging presseswith two rectangular columns are dire......

Send A Message
*If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.