35MN Two-Column Open Die Forging Press For Sale
Post Time: 2016-07-1535MN Two-Column Open Die Forging Press For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale 35MN Two-Column Open Die Forging Press, Made in China, High Quality Products!, China open die forging press, open die forging hydraulic press, hydraulic forging press, forging press, 35MN open die forging press, two column forging press Supplier, Manufacturer.
35MN Hydraulic Press for Open Die Forging
LS Heavy Industry Engineering Co., Ltd. 35MN push-down hydraulic forging presses with two rectangular columns are directly oil-hydraulically driven. They offer a high forging speed and better visibility of the forging area for operator, as same as pull-down forging presses.
They have a pre-stressed frame with two built-in tie rods for each column ensuring high rigidity and antifatigue. Individual casting upper crossbeam and bottom crossbeam is for easy transportation and installation, so they are for medium or large forging forces. Two-rectangular-column is better for withstanding eccentric load. It also ensures equal and uniform distribution of loading between two columns.
High tensile pre-stressed tie rods ensure a high working load, together with casting frame to keep a very low working stress. Special columns guide is designed to absorb shock from eccentric loading.
All hydraulic cylinders and guiding components are above the floor, and can be easily maintained.
Nominal force: 20MN/25MN/31.5MN/45MN/63MN/80MN
Stress analysis
Finite element analysis
3D design
35MN Forging Press
Data
Nominal force
Upsetting force
﹝MN﹞
﹝MN﹞
31.5/20/11.5
35MN
Net. Daylight
﹝mm﹞
4150
Max. stroke
﹝mm﹞
2000
Clearance distance between columns
﹝mm﹞
2800
x 1600
Moveable table size, L.R. x F.B
﹝mm﹞
6000 x 2000
Moveable table stroke
﹝mm﹞
4000
Moveable table speed
﹝mm/s﹞
0-250
Stroke of bottom die shifting device
﹝mm﹞
4000
Table width of bottom die shifting device
﹝mm﹞
1000
Speed of bottom die shifting device
﹝mm/s﹞
0-250
Allowable eccentricity
﹝mm﹞
≤φ500
Upper die height
﹝mm﹞
1000
Bottom die height
﹝mm﹞
1150
Rated working pressure
Working pressure for upsetting
﹝MPa﹞
﹝MPa﹞
31.5
35
Max. approach speed
﹝mm/s﹞
250
Max. return speed
﹝mm/s﹞
250
Return force
﹝kN﹞
4450
Forging accuracy
﹝mm﹞
±1
Forging speed
31.5MN
20MN
11.5MN
﹝mm/s﹞
﹝mm/s﹞
﹝mm/s﹞
90
100
120
Upsetting speed
35MN
﹝mm/s﹞
25
Press height
Above the floor ±0
﹝mm﹞
10300
Below the floor ±0
﹝mm﹞
3730
11.5MN
Penetration
﹝mm﹞
3-5
Stroke
﹝mm﹞
20-25
Frequency
﹝strokes/min﹞
≥80
20MN
Penetration
﹝mm﹞
100
Stroke
﹝mm﹞
120-150
Frequency
﹝strokes/min﹞
19-20
31.5MN
Penetration
﹝mm﹞
150
Stroke
﹝mm﹞
200-250
Frequency
﹝strokes/min﹞
10-11
Tags: open die forging press, open die forging hydraulic press, hydraulic forging press, forging press, 35MN open die forging press, two column forging press
Get QuoteLS Heavy Industry Engineering Co., Ltd.
Address: LS Group High Tech Equipment Industrial Park, Lanzhou New Area, Lanzhou City, Gansu, China,
Tel: +86-512-5832 8328
We are proud of our Made-in-China, serving the world
LS Heavy Industry Engineering Co., Ltd. is a modern company based on LS Group, a long history and most famous open-die forging solution supplier in China. We are renowed for the high performance, reliability, stability of machine products and professional fit-to-customer-think service. The know-how helps us develop more state-of-the-art forging equipment as well as build trust and confidence from our customers. A large number tailor-made forging units have been completed through the relations between us and end users. Now we have constructed the largest facilities for planning, production, administration and after-sales service in China. A more quick response on whatever which including design, manufacture, delivery comes true. To-be-better shall always be motto for our development.
Related Products
Cooling bed according to the specifications of the production of steel to distinguish between a small rod cooling bed, the bar cooling bed, the big stick coolin......
Bar weighing platformFinishing equipment in the collection area after the cold shear (or flying shear), by the ruler, finishing the collection area before the r......
Bar weighing platformFinishing equipment in the collection area after the cold shear (or flying shear), by the ruler, finishing the collection area before the r......
Flat Steel Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of autom......
Steel Tube Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of autom......
Steel Section Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of au......
Steel Section Palletizing MahineFully automatic steel palletizing machine is developed by our company by the mechanical, hydraulic, electrical integration of au......
Steel bar chamfering machineOur self-developed flat-roller grinding wheel chamfering machine is used to chamfer the ends of the round steel, remove the burr bur......
Bar bundling machineThe bundlingmachine is used for preforming and bundlingof rebar and bar before binding, to create conditions for automatic baling or manual ......
Section bar strapping machine Model MLXD-650 / 6.5 automatic steel wire strapping machine: mainly applicable to the packing of steel baling. The machine uses th......
Steel bar strapping machine MLKDA-400/200 automatic wire strapping machine: mainly applicable to small and medium-sized bar bundles of packaging. The machine us......
Steel bar strapping machineModel: MLLS-420 / 6.5Application: It is mainly applied to the packing of small bars. The machine uses the high-wire hot-rolled wire r......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
The drive system is the most important partfor a screw press. In LS Heavy Industry Engineering Co., Ltd., drive system ofAC asynchronous motor based on direct t......
40MN HydraulicPress for Forming Dished HeadLS Heavy IndustryEngineering Co., Ltd. designs and manufactures 40MN hydraulic press used in pressurevessels. The pus......
2500MN HydraulicPress for Forming Dished HeadLS Heavy IndustryEngineering Co., Ltd. designs and manufactures 2500MN hydraulic press used in pressurevessels. The......
100MN HydraulicPress for Forming Dished HeadLS Heavy IndustryEngineering Co., Ltd. designs and manufactures 100MN hydraulic press used in pressurevessels. The p......
300MN HydraulicPress for Sheet Metal ShapingThe 300MN hydraulic press is specially designed forultra high strength sheet metal shaping for plate type heat excha......
LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extruding presses which perfectperformed in the famous seamless stainless steel......
LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extruding presses which perfectperformed in the famous seamless stainless steel......
LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extrusion presses which perfectperformed in the famous seamless stainless steel......
LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extruding presses which perfectperformed in the famous seamless stainless steel......
LS Heavy Industry Engineering Co., Ltd.developed hydraulically driven horizontal extrusion presses which perfectperformed in the famous seamless stainless steel......
Multi-Directional Extrusion Press for Valve BodyLS Heavy IndustryEngineering Developed new generation multi-directional extrusion pressespecially used for hot v......
12000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs t......
10000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs t......
9000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
8000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
6300mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
5000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
3500mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
3000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
2500mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
2000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
1600mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
1250mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
1000mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs to......
630mm Horizontal Radial and Axial Ring Rolling MillLS Heavy Industry EngineeringCo., Ltd. ring rolling mills are used where the diameter of the blanks needs tob......
RingRolling MachineLS Heavy Industry Engineering Co., Ltd.designed the first set of radial forging machine in China. It is combined withstate-of-the-art design,......
IntegratedOpen Die Forging UnitFor highest forging efficiency in allforging cycles, especially in bar production, rail-bound forging manipulator(s)integrated wi......
500kNRailbound Manipulator for Open Die Forging500kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety......
300kNRailbound Manipulator for Open Die Forging300kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety......
200kNRailbound Manipulator for Open Die Forging200kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety......
160kNRailbound Manipulator for Open Die Forging 160kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variet......
50kNRailbound Manipulator for Open Die Forging50kN railbound manipulator is designed forholding ingots which are closely clamped by their tongs with a variety o......
MoveCylinder Hydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd.moving cylinder type open-die forging presses are the best solution for ......
Four-Column Hydraulic Press for OpenDie ForgingBesides two-columnforging press, LS Heavy Industry Engineering Co., Ltd. also designs andmanufactures push down t......
50MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd. 50MN push-down hydraulic forging presses with two rectangular columns aredirectl......
45MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd. 45MN push-down hydraulic forging presses with two rectangular columns aredirectl......
35MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd.35MN push-down hydraulic forging presses with two rectangular columns aredirectly......
31.5MNHydraulic Press for Open Die ForgingLS Heavy Industry Engineering Co., Ltd.31.5MN push-down hydraulic forging presses with two rectangular columns aredire......
25MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 25MN pull-down hydraulic forging presseswith two rectangular columns are di......
20MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 20MN pull-down hydraulic forging presseswith two rectangular columns are di......
16MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 16MN pull-down hydraulic forging presseswith two rectangular columns are di......
12.5MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 12.5MN pull-down hydraulic forging presseswith two rectangular columns ar......
10MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 10MN pull-down hydraulic forging presseswith two rectangular columns are di......
8MN Oil-Hydraulic Press for Open Die Forging LSHeavy Industry Engineering Co., Ltd. 8MN pull-down hydraulic forging presseswith two rectangular columns are dire......