Industrial Batteries

Plastic PP / PET / PA Filament Extruder Machine / Production Line

Plastic PP / PET / PA Filament Extruder Machine / Production Line is used to produce PET / PA / PP filament from 0.06mm to 2.5?mm diameter.The filament is widely use for brush,broom,hairpiece,fishing net,building statety protecting netting,plastic rope,plastic twine.

?

1. strong suitability for materials, high reliable

2. take up small area, simple design

3. simple operation, easy to maintain

4. high output, low waste and cost, high performance

5. good efficient and convient

6. can use recyle material and new material steady

7. low energy consumption, low noise, stable operation, large loading capacity, long service life

8.?The diameter of the monofilament could be from 0.06 to 2.5 mm

?

Our Plastic PP/PET/PA Filament Extruder Machine / Production Line advantage:

?

1. We could use 100% recycled PP / PET / PA materials for plastic filament.

2. Great dehumidifying and crystallizing system

3. ?High quality PET final filament

4. ?Italy design type packing and cutting

?

?

Plastic PP/PET/PA Filament Extruder Machine / Production Line?is complex,here is a equipment list:

?

1, Dehumidifying?and?Crystallizing,Feeding Equipment

2, Single?Screw?Extruder?

3, Automatic?Screen?Changer

4, Metering?Pump

5, PET / PA / PP Filament?Extrusion?Die?Head

6, Stainless?Steel?Water?Tank?Cooling?System

7, Water?Suction?Device

8, The?First?Seven?Rollers?Haul-off

9, Water?Heating?Oven

10, Water?Suction?Device

11, The?Second?Seven?Rollers?Haul-off

12, Heating?Oven

13, The?Third?Seven?Rollers?Haul-off

14, Glazing Machine

15, Shaping oven

16, The Fourth Three Rollers Haul-off

17, Winding Machine

18, Packing Machine

19, Cutting Machine

20, Electrical Cabinet

?

Plastic PP/PET/PA Filament Extruder Machine / Production Line Machinery Information:

?

- - - -
Type | SJ 70 | SJ 80 | SJ 90 | SJ 100 |
Screw Diameter (mm) | 70 | 80 | 90 | 100 |
L/D | 1 : 25 | 1 : 25 | 1 : 25 | 1 : 25 |
Gear Box | 200 | 225 | 225 | 250 |
Motor Power (kw) | 22 | 30 | 37 | 45 |
Output (kg/h) | 80-100 | 100-120 | 120-140 | 140-160 |
Filament Diameter (mm) | 0.06-2.5 | 0.15-2.5 | 0.15-2.5 | 0.2-2.5 |
- - - -
? Technology?and?Service:
?
1. Seller?supply?full?set?of?technical?document,?cutter?and?other?full?document?(write?in?English)?for?the?extrusion
?machine.
2. Seller?supply?training?for?buyer& acute;s?staff?until?buyer?can?produce?the?eligible?production?independently.
3. Seller?is?responsible?for?installing,?testing,?adjusting?and?debugging?the?machines?in?buyer& acute;s?factory.
4. Buyer?should?pay?the?expense?for?our?engineers?including?for?our?engineer?including?round-?way?tickets,?
inland?traffic,?lodging?and?boarding?fee?when?the?machine?is?installed,?tested?and?maintained.
5. Seller?will?go?to?install?machines?after?the?machine?is?arrived?at?buyer?and?buyer?will?have?prepared?all?
conditions?(including?power,?water,?compress?air,?tools?and?materials?for?producing?pipe,?etc)?for?installing?and
?testing?these?machines.Buyer?should?pay?60USD/day.
6. When?installing,?people?of?both?sides?cooperate?well?and?carefully,?buyer?supplies?convenient?working?
condition,?any?problem,?should?discuss?peacefully?and?kindly.
7. Buyer?supply?proper?working?tools,?equipments?and?other?conditions.
8. The?expense?including?the?accommodation?and?materials?of?the?trial-run?the?machine?for?testing?and?other?
expenses(electric,?water,?air?and?worker)?will?be?on?seller& acute;s?account,??if?the?buyer?or?their?representatives?do?
the?inspection?of?the?machines?before?shipment.
9. Guarantee?period:14?months?after?shipment?(the?date?of?B/L)