Water Treatment

Poly Aluminium ferrous chloride (PAFC)
CAS NO: 1327-41-9
Polymeric aluminum ferric chloride is inorganic high molecular polymer. The polymeric aluminum ferric chloride liquid is reddish brown and transparent; The polymeric aluminum ferric chloride solid is reddish brown powder. Polymeric aluminum ferric chloride plays an important role in high turbidity water and low temperature and low turbidity water& acute;s purification treatment.
Polymeric aluminum ferric chloride can overcome the PAC in low temperature and low turbidity of water purification difficulty. Therefore, Polymeric aluminum ferric chloride water purification is obviously superior to general water purification products.
The Polymeric aluminum ferric chloride mainly performance and advantages:
1, hydrolysis speed, hydration weak. The formation of alum dense velocity faster. Affected by water temperature change is small, meet in the shear force generated in the process flow requirements.
2, solid product is brown, reddish-brown powder, easily soluble in water.
3, which can effectively remove the source of aluminum ions in water, as well as aluminum salts in the water after coagulation of free-state residual aluminum ions.
4, wide scope of application, drinking water, industrial water, domestic water, domestic sewage and industrial effluent treatment.
5. Less medication to deal with good effect, than any other coagulant 10-20% cost savings.
6. Using methods and packing, as well as attention to essentially the same matters with the PAC.
Furthermore, Polymeric aluminum ferric chloride will not block pipes over long-time usage.
Application of Polymeric aluminum ferric chloride :
Mainly used for purifying treatment of drinking water, domestic water, and industrial wastewater, especially for low temperature and low turbidity water.
Notes:
The product should be stored in dry and ventilated places, but, the effect of the products will not be affected even if it gets wet.
http://www.cnwatertreatment.com/