Biochemical

Polishing oil additiveT6013 Metal Rolling Polishing Oil Additive Package?Product Introduction T6013 is a kind of additive for the process of metal rolling or polishing ,which is made from the extreme pressure anti-wear agent composition, oily agents , friction modifiers, rust and corrosion inhibitors, antioxidants and other additive composition. It is used for the process technology of high-strength metal rolling and molding and metal wire feeding polishing of steel alloy , carbon steel, copper alloy and aluminum, etc .It has excellent friction properties, rust and corrosion inhibitor performance , it has mild odor without sulfur, phosphorus, chlorine and boron chemical elements, which meets the standard of GB 7631.5 . Reference dosageItemReference DosageTypes of ?petroleum products & dosageCan blend fast cold rolling oil within the dosage of ?2.0-4.0%（m） ? ? ?Can blend fast wire feeding polishing oil within the dosage of 5.0-10.0%（m）Base oilAPI group I , the mixture of API group ?II with synthetic esters or animal grease??????Other additivesT903 anti-foaming agent?is possible needed ??????????Oil blending temperatureNot over 65℃SpecificationItemTypical ValueTest MethodAppearanceLight yellow?transparent?liquidVisualKinematic Viscosity?40℃　mm2/sReportGB/T265Flash Point,(open)℃≥?160GB/T267Density?20℃ g/cm3ReportGB/T1884Copper corrosion (100℃,3H)Top gradeGB/T5096Packing & Storage This product should be operated as SH/T0164 during the storage,loading and unloading?and?oil blending. The temperature should not exceed 50℃?for storage,and the temperature should not be over?60?℃?during the?loading and unloading?and?oil blending.This product is non-flammable, non-explosive and non-corrosive.In terms of safety, environmental?protection and application, it is the?same as general petroleum?products,?there is no need for special protection.?The product is packed in 200 liter metal drum?(Net weight is 180kg/drum).