Machinery & Industrial Supplies

Welcome to purchase discount source pneumatic valve from our company,Website:http://www.wtindustrialeqpt.com, which is one of the best China pneumatic valve manufacturers and suppliers.Pneumatic valveSamson Pneumatic valve Standard version designed for temperatures from –10 to +220 °C (15 to 430 °F) with pneumatic actuator.Principle of operation (Fig. 3 and Fig. 4)Depending on the version, the three-way valve can be used for either mixing or diverting service.In mixing valves, the process media to be mixed enter at valve ports A and B. The combined flow exits the valve at port AB (see Fig. 3). The flow rate from ports A or B to AB depends on the cross-sectional area of flow between the seats and plugs. In diverting valves, the process medium enters at the valve port AB and the partial flows exit at ports A and B (see Fig. 4). Note: The design of the mixing and diverting valves in sizes DN 15 to 25 (NPS ? to 1) is identical.Technical dataVersionDIN?ANSIValve sizeDN 15 to 150NPS ? to 6MaterialCast ironEN-JL1040Cast steel 1.0619Cast stainless steel1.4408Cast steelA216 WCCCast stainless steelA351 CF8MPressure ratingPN 10, 16, 25, 40Class 150 or 300Type of end connectionsAll flange types acc. to DIN EN 1092-1/-2 ? 1)RF 2)Seat/plug sealMetal sealMetal sealCharacteristicLinearLinearRangeability50:1 for DN 15 to 5050:1 for NPS ? to 230:1 for DN 65 to 15030:1 for NPS 2? to 6Temperature ranges in °C and °F. Permissible ? operating pressures according to pressure-temperature diagramsBody without insulating section–10 to +220 °C–10 to +220 °C (15 to ? 430 °F)Body withShort insulating section 3)–10 to +300 °C–10 to +400 °C 4)–50 to +450 °C 4)–29 to +427 °C(–20 to +800 °F)–50 to +450 °C(–58 to +842 °F)Short bellows seal 3)–10 to +300 °C–10 to +400 °C 4)–50 to +450 °C 4)–29 to +400 °C(–20 to +750 °F)–50 to +450 °C(–58 to +842 °F)Leakage class according to IEC 60534?4 or ANSI/FCI 70?2I (0.05 % KVS)I (0.05 % KVS)1) Except for tongue Form D, groove Form D and female face Form F for D