Electric Power Tools

Product Name:keyless entry smart car alarm system with passcode car security protection auto central lock feature
Model No:1100XN
brand is cardot

Main Detailed Functions:
1. passive keyless entry lock or unlock car door
automatical lock when you approach to the car at 1-3meters

automatical unlock when you leave your car at 1-3meters


2. Ignition button start stop engine:


pressing the footbrake pedal and pressing start or stop button to enable car engine or disable the car engine


3. Remote start stop engine at long distance:


in arming,press start or stop button or other functional button to start engine or stop car engine at long distance,auto oil path wire detection to make sure successful start!

?

in the summer,you can remote start to precool the car.

in the winter,you can remote start engine to prewarm the car.


4. passcodes touching key pad unlock car door and engine starting


if car owner lost smart keys or smart key battery is dead,you still can enter the car and start engine by inputting passwords,making your driving life confortable and convient!

default passwords is 123456

you can change this passwords by you!

if you forget passwords,you can press learning button 12 times,passwords will be returned to factory passcodes 123456


5. shock sensor alarm(shock sensor is optional and extra value!!!)
in arming,if trigger shock situation,system will make alarm such as hitting the car
siren will sound and direction light will flash.

?

shock sensor sensitivity is adjusted by swich knob!


6. side door alarm
factory signal output is negative,most cars have negative side door switch
but if your car is positive signal,you can change signal polarity by jumper setting inside the main unit


7. window rolling up output
factory output is negative signal,if you want to have auto window up feature after action,you need to install window closer module.as for some cars,can trigger window up by relay!


8. central lock automatication
?
when unlock car door and start engine,all car doors will be auto locked after some times.it is useful to protect children sitting behind of the car!
?
when engine is off,all car doors will be auto unlocked automatically.


9. washing car mode
service mode is also called washing car mode,under the mode,no car alarm features,car owner only lock or unlock car door.


10. remote open trunk
holding the remote unlock button for more than 5seconds,car trunk will be triggerred

factory signal output is negative signal

if your original car trunk control wire signal is positive signal

you need to add one relay to switch polarity.


11. mute or vocal alarm mode
under the mute mode,no siren sound,only flashing light
you can set mute mode when engine is running


12. hopping code protection
this code has high security protection anti dublicated anti scanning.
13. supporting auto transmission or manual transmission car
14. supporting diesel or petrol car
15. siren negative output,directly working with original car horn

if you want to use car alarm siren,you can change siren output signal polarity by jumper setting inside the main unit.


16. bypass output
bypass module is not standard position,if your car has chip key immobilizer signal,you need to install bypass module to work.it is also called chip avoidance device.
it has three wires:
red wire to 12V
black wire to ground or by pass output wire from smart car alarm or push start system
RFID sense wire to car key cylinder,wrap it 3-5 circles
?

product standard composition:
?
1pc main unit,2pcs smart remotes,1pc start stop button,1pc 6P start cable,1pc main cable,1pc passwords touch key pad,2pcs pke antennas,1pc alarm antenna,1pc english manual,1pc color packing box.

How to find ignition wire and 12V power wire?

?

OBTAINING CONSTNT 12V
We recommend two possible sources for 12v constant:the(+)terminal of
the battery, or the constant supply to the ignition switch,will be powering
fuse within 12 inches of this connection,if the fuse also willbe powering
other circuits, such as door locks, a power window module, headlinght
control system etc,fuse sccordingly.


FINDING THE 12V SWITCHED IGNITION WIRE


The ignition wire is powerd when the key is the run or start position
,this is because the ignition wire powrts the ignition system(spark
plugs,coil)as well as the fuel delivery system(fuel pump,fuel injection
computer),accessory wires lose power when the key is in the start
position to make current available to the srarter motor.

How to find(+)12v ignition with your multimter:
1.set to DCV or DC voltage (12v or 20V is fine)
2.attach the (-)porobe of the meter to chassis ground.
3.probe the wire you suspect of being the ignition wire,the steering
column harness or ignition switch harness is an excellent place to
find this wire.
4.turn the ignition key switch to the run position,if your meter reads
(+)12v,go to the next step.if it doesn& acute;t,probe another wire.

5.now turn the key to the start position,the meter display should stay
steady,not dropping more than a few tenths of a volt,if it dropse
to or all the way to zero,go back to step 3. if it stays steady at(+)12v,
you have found an ignition wire.

?

Product Real Photos:
?


?



?


?