Adhesives & Sealants

Red Glue
1.strong adhesive
2.heat resistant
3.hardening in the low temperature available
4.applied to various field

NE880K SMT Red GlueFuji red plastic, produced in Japan, is used in the field of SMT as a stable single-component epoxy adhesive, the product main models are: Fuji red plastic NE3000S; Fuji red rubber 8800K; Fuji red rubber 8800T.


Feature

1, to allow low-temperature hardening;
2, despite the high-speed coating, micro-small amount of coating can be maintained without any drawing, the collapse of the stable shape;
3, for a variety of adhesive components that are available to the stability of the adhesion strength;
4 stores stability and excellent performance;
5, with high heat resistance and excellent electrical properties;
6, can also be used for printing.
7, the higher the curing temperature and curing time longer, more access to a high degree of intensity;
8, depending on the size of the parts containing the substrate, and filled with different positions, in addition to the actual adhesive temperature varies, so need to find the most suitable curing conditions.

Curing condition
Fuji Red glue curing condition other models red rubber NE3000S: recommended curing conditions are the substrate surface temperature reaches 150 °C after 60 seconds or after 100 seconds to reach 120 °C; Fuji red rubber 8800K: recommended curing conditions are the substrate surface temperature reaches 150 °C after 60 seconds to reach 120 °C after 100 seconds; Fuji red rubber 8800T: recommended curing conditions are the substrate surface temperature reaches 150 °C after 45 seconds, reach 120 °C after 100 seconds;