Automobile Parts

Feature
1. Prevents rainwater from the mirror surface.
2. Rear view rain shield LED emits light (or the neon power inside) for better indication of direction.
3. Enhances driving safety in making turns.
How to use adhesive take
1. Lean the place with a neutral detergent.
2. Tear off adhesive paper. Do not touch the adhesive surface with hand.
3. Operating temperature at 10 degree or higher. Avoid contact with water for the first 24 hours.
4. Apply appropriate pressure on the double-side adhesive paper.
Installation
1. Choose a location, wipe clean with a neutral detergent, stick on the rear view mirror.
2. Connect the transparent/white wire (positive +) to a 12V power source (such as the positive pole +) of a direction indicating lamp or a small lamp.
3. Connect the negative pole transparent wire to ground or (-negative pole).
Notice:
Before installation, park the car in a safe place turn off power and pull up the brake lever.