Agriculture Equipment & Supplies

If you are checking China mini printer battery,Website:http://www.m-batterys.com, mobile printer battery manufacturer and supplier, or mini printer battery chinese factory, please feel free to contact M-Batt Electronics, we are always at your service.Model No：?DF-GX001Charge voltage：?8.4VNominal Voltage：?7.4VNominal Capacity: 2200mAhCharge current : standard charge: 0.5CRapid charge : 1CStandard charging method: 0.5CCC（constant current）charge to 4.2V,then CV(constant voltage 4.2V)charge till charge current decline to≤0.05CCharging time Standard Charging：3.0hours(Ref.)Rapid charge：2hours(Ref.)Max.charge current 1C（2200mA）Max.discharge current 1C(2200mA)Discharge cut-off voltage 3VOperating temperature Charging：0℃~45℃Discharging：0℃~45℃Storage temperature -20℃~ +60℃Storage Humidity : 20~85%RH (not condensed)Charging and Discharging1. Do use suitable charger and charge with specified voltage , current and temperature, humidity.We strongly recommend the smart battery charger.Never attempt reverse charging.Avoid over-charging.4. Do not discharge the pack under over-discharge voltage.5. Over-discharging may cause loss of performance, characteristics of the pack function.6. Mechanical shock protection7. Otherwise, it may cause shape distortion, leakage, heat generation and/or rupture.For Safety1. Do not short-circuit with metal wire, necklace, chains or any conductors.2. Do not drop the pack from height.3. Do not twist or bend the pack.4. Do not disassemble the pack.5. Do not use the pack when something abnormal is found such as smells,deformation, discoloration,and so on.6. When the electrolyte leakage occurs, do not touch the liquid.7. Do not soak in water or get it wet.8. Do not have the pack in the hot-temperature (more than 60℃).9. Do not put the pack into fire.10. Do not crush/nail the pack.11. Do not apply solder directly to the pack.12. Do not charge the pack nearby the fire or under the blazing sun.13. Do not drive a nail into the pack, strike it by hammer, or trea