Alarm

Product Overview
The mini exhibits anti-theft device is an integrated circuit design, automatic microcomputer controlled .For the currently IT store, shopping malls showcase, personal shops frequently appear laptops, MP3/MP4, digital camera, GPS navigation, mobile hard disk, etc. stolen precious commodities research and development, the product is simple to operate, regardless of computer, mobile phones, cameras and other electronic goods are plug boot can work properly to achieve the anti-theft alarm. Once the product off or cut lines, high-decibel alarm can be issued immediately, and a red light flashes.

Product Function
Break alarm function: three contacts break alarm.
Host paste in the booth or counter shelves hidden places, pasting head pasted on the need to protect the product, and then open the computer switch into armed state. Once the product and paste the head apart, or host detachment or wires disconnected, the host will send a high-decibel alarm sounds immediately and the red indicator light flashes to alert staff to deter thieves.

Product Parameter
Type mini exhibits anti-theft device
Operating voltage 3V
Bi tone output 85±5DB at 1ft
Stand-by current consumption 1.0uA (typical)
Activation current consumption 28mA(typical)
Alarm mode Break paste head off alarm
battery 3V button battery(built in)
material ABS
Host size 4cm*1cm*1cm
Wire diameter 0.2cm
The charging function You can charge the 5V digital product output
color White/black

Product operating step
1. Tear off the 3M adhesive tape of the paste the pasted on the sample or exhibits.
2. Tip the host of 3M tape, paste hidden places in the showcase or shelf.
3. Open the master switch, enter the armed state.