Metal / Zinc Alloy Die Casting Products For Home Door Decoration - NY-105
Metal / Zinc Alloy Die Casting Products For Home Door Decoration For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Metal / Zinc Alloy Die Casting Products For Home Door Decoration, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.
?
Metal / Zinc Alloy Die Casting Products For Home Door Decoration
?
Quick Detail:
?
1. Good surface
2. Nice plating appearance
3. SGS report can be provide
4. Can make large part
5. Professional mold flow analysis
6. 100,000pcs be provided per month
?
?
Description:
?
Zinc die casting is a manufacturing process that can produce geometrically complex metal parts through the use of reusable molds, called dies. The die casting process involves the use of a furnace, metal, die casting machine, and die. The melted zinc in the furnace and then injected into the dies in the die casting machine.?
?
?
Applications:
?
Furniture
?
?
Specifications:
?
- - - -
Product? name | Product No. | Material | Dimension? | Weight | Surface treatment |
zinc alloy die casting accessories for decoration? | NY--105 | ZINC3 | 8*2*2cm | 40g?????? | ??? plating |
- - - -
?
?
?
?
?
?
?
?
Competitive Advantage:
?
1. Can produce large parts
2. Can form complex shapes
3. High strength parts
4. Very good surface finish and accuracy
5. High production rate
6. Low labor cost
7. Scrap can be recycled
?
?
The process of zinc die casting:
?
The molten metal flows into a shot chamber through an inlet and a plunger, powered by hydraulic pressure, forces the molten metal through a gooseneck channel and into the die. Typical injection pressures for a hot chamber die casting machine are between 1000 and 5000 psi. After the molten metal has been injected into the die cavity, the plunger remains down, holding the pressure while the casting solidifies. After solidification, the hydraulic system retracts the plunger and the part can be ejected by the clamping unit. Prior to the injection of the molten metal, this unit closes and clamps the two halves of the die. When the die is attached to the die casting machine, each half is fixed to a large plate, called a platen. The front half of the die, called the cover die, is mounted to a stationary platen and aligns with the gooseneck channel. The rear half of the die, called the ejector die, is mounted to a movable platen, which slides along the tie bars. The hydraulically powered clamping unit actuates clamping bars that push this platen towards the cover die and exert enough pressure to keep it closed while the molten metal is injected. Following the solidification of the metal inside the die cavity, the clamping unit releases the die halves and simultaneously causes the ejection system to push the casting out of the open cavity. The die can then be closed for the next injection.
?
?
Mold open
?
Mold closed
?
Product be made
Dongguan Nanyue Mold Die Casting Co., Ltd.
Address: No. 6, Xinye South Street, The Fourth Industrial Zone, Xiagang, Chang'an Town, Dongguan , Guangdong , China, 511700
Tel: 86-769-82280680
DONGGUAN NANYUE MOLD DIE-CASTING CO.,LTD. was founded in 2001, with 50,000 square meters' area, located in Dongguan City, Guangdong Province,is a professional Aluminum&Zinc die casting mold and parts manufacturer.
After several years of development, NANYUE has become a medium-sized enterprise,now it has more than 100 employees and the annual output capacity is up to 2000 tons .
We have several sets of 180T-650T zinc &aluminum alloy die casting machines, as well as fully equipped post-processing equipment. In order to keep in line with International standard, we have passed ISO9001:2008 Quality Management System Certification in September 2009 .
NANYUE is always committed to manufacturing and processing various die-casting products and die-casting molds and providing one-stop quality services from product design, die-casting mold R&D, finished product manufacturing and cargo delivering.
In order to meet our customers' requirements and serve them better, we have established three subsidiaries in succession:
Nanyue (Shunfa) Coating Plant
Nanyue (Rihua) Sandblasting Plant
Nanyue (Huida) Polishing Plant
Nowadays, our products have enjoyed high popularity at home and abroad, we are currently exporting our products worldwide, such as Europe,North American,Australia,South Africa, Southeast Asia ,Middle East and so on.
If you are interested in our existing products or want to develop your own new product, please contact us today by email or phone.we will bring you an efficient and satisfactory one-stop service.
