Power Distribution Equipment

A static synchronous compensator (STATCOM), also known as a static synchronous condenser (STATCON) or Static var generator (SVG), is a regulating device used on alternating current electricity transmission networks. SVG is the representative of newest technology in reactive power compensation field, which is connected in parallel to the grid, similar to a variable var current source. Its var current can change following the load rapidly and automatically.

Technical Specifications
AC Input
Rated voltage:6kV/10kV/35kV
Rated frequency:50X(1±5%) Hz
Mode of connection:3P3W
Target power factor:Meet design requirement within capacity range
Full response time:5ms (10%~90%)
Active power loss: less than 0.8% of rated power
Operation mode:Constant power factor, constant reactive power and constant voltage control are optional
Communication:Modbus Protocol (RS485/Ethernet interface)
Operation display:Parameter setting, multiple parameters display, Operating data recording, faults recording etc.
Expansion capability:Parallel operation is available to meet the demand of larger capacity.
Protection:Power grid over-voltage, under-voltage, phase lost;
DC Busbar over-voltage, under-voltage;
Power module over-current;
Control system power loss protection;
Automatically current limit in case of overload;
Communication failure protection

Operation Environment
Altitude: less than 1000m (derated power if more than 1000m, or specially customized)
Ambient temperature:-10degree~+45degree
Storage temperature:-25degree~+65degree
Ambient humidity:Maximum relative humidity 95% (non-condensing)
Anti-fouling grade:Grade III
Earthquake resistance:7 degrees