Tableware

Mechanical Air Flotation Machine / Flotation Cell Self Absorption

?

?

?

Summary

?

The froth Sotation process is commonly employed for the selective separation of a mineral species from a liquid-solid suspension of both valuable and unwanted gangue mineral particles. Flotation Machine is suitable to separate non-ferrous metal, ferrous metal such as copper, gold, silver, zinc, lead, nickel, etc., noble metal, non-metallic mineral such as kaolinite, phosphorus, sulfur, etc., chemical rough and etc. It can be used in roughing, scavenging, concentration or reverse flotation.

?

In flotation machine, the slurry mixed with drugs would be stirred and inhaled air, so that valuable minerals adhere to bubbles, float to slurry surface and then scraped off, other minerals still stay in the slurry, thus valuable minerals are separated out.

?

Working principle

?

The Flotation Machine was driven by the motor with the working of impeller rotation, and then produces the centrifugal effect, and form the negative pressure. On one hand, adsorbing enough air to mix with the pulp; on the other hand, stirring the mixture of pulp and drugs, in the meanwhile, refining bubble, make the mineral adsorbed on bubbles, float to the pulp surface and form the mineralized bubble . Adjust the flashboard height, control the pulp surface, make the foam scraped by the scraping plate.

?

To meet the special needs of flotation process, flotation cell machine what should be the basic requirements?

?

In the process of flotation ,flotation cell machine is the realization of basic equipment, mineral flotation separation. flotation cell machine and ordinary machines, in addition to ensure reliable operation, wear-resisting, power saving, low cost and easy to manufacture, but also meet the special requirements of flotation technology.So for flotation cell machine has the following basic requirements:

?

First, good air
?

Flotation cell machine must ensure that the pulp sufficient quantity of air inhaled (some froth flotation machine is an external pressure fan into the air) and try to diffuse in the groove.Because the more the more air dispersion fine uniform, particles in contact with the air bubbles, the more chance will flotation efficiency is higher.

?

Second, the mixing effect
?

Flotation cell machine guarantee of pulp with good mixing effect, make particles from precipitation and went into a state of suspension, and can be evenly distributed son groove, promote the dissolution of some south of soluble drugs at the same time, to facilitate reagents and ore grain role fully.

?

Third, circulation flow
?

The slurry circulating within the flotation machine, can increase the chance of ore grain contact with bubbles.

?

Four, can adjust the ore slurry surface and can work continuously
?

In the process of flotation, sometimes need to adjust the thickness of the foam layer and slurry flow.And in production from feed to concentrate and tailings discharge, is a continuous process.

?

Features

?

Low operating and maintenance costs

?

Large inhaling capacity and low energy consumption; Complete flotation circuit with inhaling air and pulp, no auxiliaries are needed;

?

High equipment reliability contribute to a rapid return on investment.

?

The wide range of available cell sizes permits plant design to be compact, economical and efficient, without fear of short-circuiting, even for today& acute;s high tonnage operations.

?

Reasonable circulation of pulp decreases coarse sand sedimentation;

?

Automatic controlling device makes adjustment more convenient.

?

Fewer units lead to substantial savings in construction costs, piping, cables, instrumentation and auxiliary equipment

?

Specifications

?

- - - -
Model | Effective capacity (m3) | Diameter of impeller (mm) | Impeller speed(m/s) | Entrained-air volume (m3/ m2.min) | Capacity (m3/min) | Motor | Weight of single cell (kg) |
Model | Power (KW) |
BF-0.15 | 0.15 | 200 | 6 | 0.9-1.05 | 0.06-0.16 | Y112M-6 | 2.2 | 270 |
BF-0.25 | 0.25 | 250 | 6 | 0.9-1.05 | 0.12-0.28 | Y100L-6 | 1.5 | 370 |
BF-0.37 | 0.37 | 286 | 7.2 | 0.9-1.05 | 0.2-0.4 | Y90L-4 | 1.5 | 470 |
BF-0.65 | 0.65 | 300 | 7.35 | 0.9-1.10 | 0.3-0.7 | Y132S-6 | 3 | 932 |
BF-1.2 | 1.2 | 450 | 7.02 | 0.9-1.10 | 0.6-1.2 | Y132M2-6 | 5.5 | 1370 |
Y132M1-6 | 4 |
BF-2.0 | 2 | 500 | 7.5 | 0.9-1.10 | 1.0-2.0 | Y160M-6 | 7.5 | 1750 |
BF-2.8 | 2.8 | 550 | 8.06 | 0.9-1.10 | 1.4-3.0 | Y180L-8 | 11 | 2130 |
BF-4 | 4 | 650 | 8 | 0.9-1.10 | 2-4 | Y200L-8 | 15 | 2585 |
BF-6 | 6 | 700 | 7.5 | 0.9-1.10 | 3-6 | Y225S-8 | 18.5 | 3300 |
BF-8 | 8 | 760 | 7.5 | 0.9-1.10 | 4-8 | Y225M-8 | 22 | 4130 |
BF-10 | 10 | 760 | 7.52 | 0.9-1.10 | 5-10 | Y225M-8 | 22 | 4500 |
BF-16 | 16 | 850 | 8.7 | 0.9-1.10 | 8-15 | Y280S-8 | 37 | 8320 |
Y280M-8 | 45 |
BF-20 | 20 | 850 | 8.7 | 0.9-1.10 | 10-20 | Y280S-8 | 37 | 8670 |
Y280M-8 | 45 |
BF-24 | 24 | 920 | 8.7 | 0.9-1.10 | 12-24 | Y280M-8 | 45 | 8970 |
- - - -

?