Rubber & Products

DESCRIPTION OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:
This is a kind of room temperature vulcanized silicone rubber in condensation type. It’s generally named as two part silicone rubber, Part A is a flowable liquid, part B is the curing agent or catalyst. It’s mainly used for mold making.
This Silicone rubber is with good fluidity and moderate hardness which is suitable for middle size product with pattern by pouring operation, especially popular for manufacturer of resin crafts and gypsum decoration. Besides,additive is available for brushing operation. It’s one of our best selling silicone!

APPLICATION OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:
This silicone rubber is used for making molds of concrete stone,GRC, gypsum decoration, plaster ornaments, fiberglass products, polyester decoration, unsaturated resin crafts, polyresin crafts, polyurethane, bronze, wax, candle, and similar products .

CHARACTERISTICS OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:
*An exceptional fluidity and good operability, easy to demold
*Moderate hardness
*High tensile and tear strength
*Good flexibility
*Cure at room temperature
*Outstanding bubble releasing
*High duplication times

OPERATION INSTRUCTIONS OF MANUAL MOLD DESIGN MAKING LIQUID SILICONE RUBBER RAW MATERIALS:
Step 1: prepare the original molds
Step 2: Take 100G parts A and add 3G parts B and mix them evenly.
Step 3: Vacuum pumping
Step 4: Pouring casting or Brush operation
(For the detail of operation instructions,please contact us)

SHELF LIFE :
Twelve(12) months when stored under dry and cool place by original package under 25℃

For more information, welcome to contact Lilian:
Phone: 86-13617490457
E-mail: lilian(at)xrsil(dot)com
Skype: 985280853(at)qq(dot)com
Company: XINRUN GROUP LIMITED
Factory address:No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China