Electronic Signs

?

?

3U 18W T4 Compact Fluorescent Lamps SDCM < 5 Luminous Efficiency > 60 lm / w

?

?

Description

?

1 . Guarantee is for 2 years .

2 . The average lifetime of our lamp is at least 6000h .

3 . Living up to the IEC60968 & 60969 standard .

4?. Using nickleplated aluminum base , very good to avoid getting rusted .

5?. For the pack , we have color box , single blister , double blister .

6. Using PBT plastic cover, PBT have two advantage : ① Inflaming retarding ② High temperature resistance .

?

Lamp parameters

?

- - - -
Tube Parameter for CFL | Type | 3U |
Tube Diameter | ?Φ 12mm |
Wideth | ?/ |
Length | 95mm |
Circle | ?/ ? |
Color Rendering Index | ?> 80 Ra |
SDCM | ?< 5 |
Color Temparature | 2700K - 6400K |
Luminous Efficency | ?> 60 lm / w |
2000h Luminous Depreciation | ?< 15% |
Responsive Time | ?< 0.5s |
Turn on off time | ?> 10 000 times |
Luminous Decay | Less than 15% at 2000hrs |
Powder | 100% A - gradeTriphosphor |
Electronic Parameter for CFL | Power | 18W |
Power Factor | ?> 0.5 |
Working Voltage | 185 - 265V |
Transister / Capacitor | Huajing / Aishi |
Base | Size | E27 |
Materials | Nickelplated Aluminum |
Type | Soldering |
Plastic cover | Wideth | 52mm |
Materials | PBT |
No middle cover |
Operating Temp. | ?-?30 ℃ to + 40 ℃ |
Life Time | ?> 8000H |
Time need to be stable | 3 Mins |
Lumen | ?> 900 LM |
- - - -

?

Competitive advantage

?

1 . Strict raw materials inspection .

2 . Technical parameter adjustment :

???? 1 ) Technicians will tune the technical parameters of each items to make sure the Wattage,P.F living up to the requirement of customer

??? ?2 ) Destructive test , light it in the oven to be under the conditions of high temperature and high voltage

??? ?3 ) Turn on off test , to make sure the life time of the lamp

??? ?4 ) Start test in low temperature and low voltage ( light in the fridge )

3 . In the mass production , our QC will take selective examination on every step , such as Plug-in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

5 . In the warehouse,our QCs will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

6 . After laoding the container,we will trace the life time of ech order,we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

?

Application

?

Widely used in home & commercial Lighting , always using together with the downlight fixtures , applying in office , Hallway , Hotel , room , shop , ect .

?

Quality Control ( QC )

?

1 . We have 4 QCs to check the raw Materials , such as tube , Transister , Electrolytic . capacitor , inductor , resister , diode , magnet ring , capacitor , PCB board , plastic cover .

2 . Before the mass production , our Technicians will tune the technical parameters of each items to make sure the Wattage , P.F. living up to the requirement of customer,and also will do the High temperature and high voltage test ( llight it in the oven ) , doing the destructive test , and also will do the turn on off test , to make sure the life time of the lamp , also do the start tets in low temperature and low voltage ( light in the fridge ) .

3 . In the mass production , our QC will take selective examination on every step , such as Plug - in , Wave soldering , PCB test , Tube glue , Assembly , Print , Ageing , Packing .

4 . we are testing every lamp before packed in the cartons .

5 . In the warehouse , our QC will take sampling inspection before load the container , if not qualified with the AQL , we will rework .

6 . After laoding the container , we will trace the life time of ech order , we will pick 10 pcs of each item to light in the ageing room till the lamp die , so we can trace down the real life time of each order .

?