Others

Low Temperature Drum Vacuum Dryer Machine For Drying Heat Sensitive Raw Materials?
1.Under the condition of vacuum the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporation can be saved.
2.The heat source for operation of evaporation may be low pressure steam or surplus heat steam. The heat loss of evaporator is less.
3.Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixing. It is in conformity with the requirement of GMP.
4.It belongs to static drier. So the shape of raw material to be dried can not be destroyed.
?
?
Description:
It is well know that vacuum drying is to put raw material to the state of vacuum to take air and humidity out, the dry speed will be faster.
Note: if use condensate, the solvent in raw material can be recovered. If use SK series water ring vacuum pump sets, condensate can not be used and the investment could be saved.
Creation Material:
1.A steel
2.Inside wall stainless steel
3.Stainless less outside the inside
?
?
Applications:
It is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature. It is wide used in pharmaceutical, chemical, foodstuff and electronic industries.
?
?
Specifications:
?

- - - -
Type | YZG-600 | YZG-1000 | YZG-1400A | FZG-1000 |
Inner Size(mm) | Φ600*976 | Φ1000*1527 | Φ1400*2054 | 1500*1400*1220 |
Outer Size(mm) | 1135*810*1020 | 1693*1190*1500 | 2386*1675*1920 | 1513*1924*2060 |
Stove Frame layer(mm) | 4 | 6 | 8 | 8 |
Distance between layers | 81 | 102 | 102 | 122 |
Drying Tray Size(mm) | 310*600*1020 | 250*410*45 | 480*600*45 | 480*630*45 |
The Number of drying tray | 4 | 24 | 32 | 32 |
Inner pressure of frames(mpa) | ≤0.784 | ≤0.784 | ≤0.784 | ≤0.784 |
Temperature(℃) | -35~150 | -35~150 | -35~150 | -35~150 |
Vacuum Degree | -0.09~0.096 |
- - - -

?
?
Competitive Advantage:
1.Under constant temperature and low air pressure, it can accelerale drying speed.
2.Under constant vacuum degree, improving heating temperature, it can accelerate drying speed.
3.Both improving vacuum degree and heating temperature, it can be greatly accelerate drying speed. Adopting cooling machine evaporating solvent in material can be worked. If adopting JZJS machine series, instead of cooling device, it can save energy and investment.
?
Oven, Dryer
?