Little Vibration High Precision Spindle , Automatic Tools Changing Precision Machining Parts - AIA-1
Little Vibration High Precision Spindle , Automatic Tools Changing Precision Machining Parts For Sale, Most Competitive Price, Fast Delivery, Custom Service, Wholesale Little Vibration High Precision Spindle , Automatic Tools Changing Precision Machining Parts, Made in China, High Quality Products!, China cheap prodocuts, china suppliers Supplier, Manufacturer.Little Vibration High Precision Spindle , Automatic Tools Changing Precision Machining Parts
?
?
Our products are sold worldwide.?
But if your country is more difficult to transport goods, please contact us in advance to confirm shipping cost.
?
?
Description:
water cooling:800w,1.5kw,2.2kw,3kw,3.2kw,3.5kw,4.0kw,4.5kw,5.5kw
GDL125 series Motor Spindle is the automatic tools changing (can store encoder) spindle designed by our company. It adopts six-pole motor-driven system and the BT40 knife handle, could usually be used in the quick processing of different materials with 12000rpm. The multichamber protective measure including double-layer sealing device and air sealing conformation can efficaciously provide liquid from getting in and keep Motor Spindle working for a long time. The GMN import bearings and engine oil are used to ensure high performance of the spindle. Tool changing structure is advanced so that the signal and tool changing movement could be reliable and stable. The Motor Spindle can additionally store the encoder and have the rigidity tapping function. It can be used in the numerically controlled production center.
?
Notes for Use of Motor Spindle?
?
1, The spindle should rotate in the specific direction.
2, Please refer to the instruction manual when store the spindle.
3, Cooling the spindle by water cooling machine should control the temperature between 22 to 25.
4, The spindle using gas seal should dry and filter its gas source by the water oil separator before using. The atmospheric pressure is required to be 0.25MPa and filtering accuracy should be 5μm, or the bearing would be damaged.
5, Motor spindle should be compatible with frequency converter. The specification and parameter setup of ?frequency converter should match the rated parameters of spindle. If not, spindle would burn out.
6, Before using the water-cooled motor spindle, it must be ensured that the cooling system is working properly and working without cooling condition is strictly forbidden. Cooling water calculate by 1 liter per kilowatt minute. The minimum flow rate of cooling water is not less than 5 liters per minute. The cooling water pipe and the water nozzle connection must be reliable to prevent leakage.
7, Coolant must be clean and free of grease. Temperature should be controlled in 5 to 30 degrees. If the ambient temperature is above 30 degrees, the cooling medium must be forced to cool. Precision machining machine requires coolant temperature at 20 degrees positive or negative 2 degrees.
8, When stored clamping tool on electric spindle, the collet , nut and tapered bore must be cleaned to ensure accuracy. The hilt is inserted into the collet must be greater than 15 mm.
9, The motor spindle must be preheated before processing every day. Until reaching the processing speed and running for 15 to 20 minutes, the spindle could start fine finishing. The spindle should stop 2 hours to prevent mechanical fatigue every day, so as to prolong the life.
10, Knock on the spindle end cover, collet and cutterhead when remove bit is forbidden. No bump in the process of saving, transporting and using motor spindles especially the end cover.
?
Specifications:
Spindle mode:NYM80-12-24Z/2.2
Spindle parametric: ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Overall size(mm):
Frequency:800Hz ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? D:80
Rotating speed:12000-24000rpm ? ? ? ? ? ? ? ? ? ? ? ? D1:62
Power:2.2Kw ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? L:230
Voltage:220V ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? L1:23
Electric current:6A ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?L2:33
Connect mode:ER20
Tool holder’s diameter:1-13mm(Factory standard: 2 fillings)
Taper hole of spindle runout:≤0.003mm
Mandrel runout:≤0.008mm
Lubricating mode: grease
Cooling mode:water
Bearings mode:2*7005 ? 2*7002
Weight:7.8KG
?
?
Applications:
Applicable scope: This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for the circular carving and drilling and milling of the hardware, glassworks and woodworks.
?
Competitive Advantage:
Product features:
Adopt the ceramic core Aerial plug, more safe and reliableLow noise, little vibration, good stability, high processing precisionInfinitely variable speed transmission for frequency changer with wide speed range
The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better. The durable years of the Bearings gets more longer.
?
?
CHANGZHOU RUNLAI IMP AND EXP CO. LTD.
Address: RM 1609-1611,NO.8 BLDG,HUADONG MACHINERY AND ELECTRICAL TRADE CENTER,NO.29 XIACHENG MIDDLE ROAD,HUTANG,CHANGZHOU,JIANGSU 213161 CHINA, Changzhou, Jiangsu, China, 213000
Tel: 86-519-86303618
Changzhou Runlai Imp & Exp Co., Ltd. is a leading company in China with rich experience in international trade and economic cooperation and great achievements. Our company has developed fast and knotted extensive business ties with over 100 clients in more than 50 countries and regions, and turned up as a leading player in many field of exporting in China. We are the main member of the China Chamber of Commerce.
Our company is located in Changzhou city, near Shanghai. We have very convinient transportation. We have promoted hundreds of products to our customers. Every year we export many products to foreign countries, now our sales volume is increasing every year because we always pay more attention to the quality of the products and offer the most competitive price to our every customer, this is why we are successful. Every customer is warmly welcome to send us your enquiry, we must give you the best service and best quality with most competitive price, we believe we will have good cooperation under our perfect service.