Electronics Production Machinery

XXG-1605 Industrial X Ray Machine Air Clooing with 160KV 5mA
?

?
Parameters
?

- - - -
Model | XXG-1605 |
Tube | Ceramic |
Output voltage | 50-160 KV |
Focus size | 1.2×1.2 mm |
Radiation angle | 40° |
Penetration | FE 22mm |
Generator size | 220×220×560 mm |
Generator weight | 16kg |
Controller size | 380×380×190 mm |
Controller weight | 12 kg |
Input power | AC 185-245V @50~60Hz |
Cooling | Air
? |
- - - -
? Introduction ? ? 1. It can still work by applying special design what can avoid the interference by power grid change. 2. We are using highpower electronic components,such as capacitance and power module with wide capability to greatly ensure the quality of the products. 3. Apply the isolation technology of low voltage and high voltage to ensure the controller working stablely. 4. Posses the reliable “time-delayed” function, suitable to operate in the open field. ? Distinguishing feature ? # Adopting micro-computer control and modular structure,with strong anti-interference ability and high automaticity and reliable performance.
# Parameter setting,working process and trouble indication will be indicated on the LED lamp.
# Independent ageing key is designed for age the machine conveniently.
# Radiating time to cooling time is 1:1.
# The controller can notice the type of x-ray generator automatically.
# The water and dust proof color panel and digital sound keyboard are introduced that exposure parameters are promptly and accurately selected.
# Ensure safety useing the instrument,it is installed with overvoltage,undervoltage,overcurrent,undercurrent and overtemperature protection device.
# Adopting the wider range of kv value, and solve the difficulty problem of short radiographic range.
# Exposure delay function——the delay time can be set less than 10 minutes to keep the operator safe from working place.
# Match with various generator and function reliably.
# With the outlet of ray warning lamp and wire connecting terminal of door-machine interlock.(Door-machine interlock——when the lead door open ,the instrument cut off the high voltage automatically to protect the operator)
?
?
Composition and Application
?
x ray flaw detector consists of three parts,controller, generator and connection cable . X Ray flaw detector plays important parts in carrying on nondestructive examination for nonmetallic, light metal, casting, various alloys and pressure vessels etc, mainly detecting weld defects ,such as crack, blowhole, entrapped slag, incomplete fusion ,blowhole,bubble etc ,also using for shipbuilding ,airplane and national defense etc industry fiel. ? Matters needing attention
?
(1) ?The internal X ray generator seal gas insulated above 0.45Mpa, if placed bolt firmware and the ? shell, then the local gas concentration and risk of breakage flying pressure, and the system can not work, please don& acute;t loosen fastening bolts, and don& acute;t put the generator in high temperature applications. (2) ?After power on, the controller has a high internal AC and DC voltage, the use of the case is not allowed to open the case, non maintenance personnel do not repair. (3) ?When not in use, the equipment should be placed in a dry and ventilated place, the temperature is suitable for a long time did not use the equipment, when enabled to see if wet and other phenomena, if there is to be treated before use. ? ?