Insulating glass production line equipment, which is better, the inner joint or the outer joint
Insulating glass is a composite glass with a hollow heat insulation layer sandwiched between two layers of glass, which has good thermal insulation, sound insulation and anti-fog effects. Insulating glass equipment is a machine equipment used to produce insulating glass. It consists of two types of lamination: inner lamination and inner lamination.
Which is better, the inner joint or the outer joint of the hollow glass production line equipment?
Insulating glass is a composite glass with a hollow heat insulation layer sandwiched between two layers of glass, which has good thermal insulation, sound insulation and anti-fog effects. Insulating glass equipment is a machine equipment used to produce insulating glass. It consists of two types of lamination: inner lamination and inner lamination.
Inner bonding refers to placing two pieces of glass inside the insulating glass equipment, first sucking up one piece of glass with a suction cup, and waiting for the other piece of glass to be glued to the aluminum frame. The two layers of glass sheets are tightly bonded together by high temperature heating. The outer joint means that the cleaned piece of glass first arrives at the joint section and waits. After the aluminum frame is bonded, the other glass piece arrives and is precisely combined, and then sent to the plate pressing section for pressing to form a hollow. The end product of glass.
Although both internal bonding and external bonding are necessary steps to make insulating glass, there are still some differences between them.
In terms of technology, the inner combination is simpler than the outer combination. But when making three layers of glass, the operation difficulty will become greater. Mistakes and slides are prone to occur when making large glass. The outer joint is more intuitive, and can precisely produce unequal pieces or special-shaped glass.
In general, although both inner and outer joints are necessary steps to make insulating glass, there are still some differences between them. In practical applications, we can choose different types of insulating glass products according to needs to meet different needs.
An Insulated glass machine - Insulating glass production line is a kind of glass deep processing equipment, which is mainly used to process and make insulating glass instruments. After cutting the original glass, it enters the insulating glass production line. It mainly goes through cleaning, drying, making spacer frames, filling desiccant, and the first seal (coated with butyl rubber). , inspection, frame placement, sheet pressing, second sealing (polysulfide glue or silicone glue), and next sheet, the insulating glass deep-processing products produced by the process are of high quality and fast processing speed.
